Wallmount enclosures series 33-stainless steel
Product Description
Wall enclosure with single door. Optionally with or without mounting panel.
Protective ground connection to DIN EN 61439-1, studs M6x16 on door and body.
Doubly flanged edges and a narrow door gap prevent dust and water from entering the cabinet when opening the door.
Door with seamlessly foamed gasket; Single door version: standard right hand hinge, change of opening direction by turning the enclosure. Double door version: right door overlaps.
Concealed hinges made of stainless steel; opening angle 180°.
Closure: up to a height of 400 mm with 1 turn lock, from a height of 401 mm with 2 turn locks, from 801 with 3-point locking, standard actuation 3 mm double-bit.
Doors with a width from 300 mm and a height from 400 mm are fitted on both sides with bolted reinforcement and hole profiles with fixing drillings in 25 mm increments for screws size M5.
Floor closed.
Mounting panel on studs M8x35 fixed to the back wall, maximum 10 mm depth-adjustable. The edged mounting panel is fixed.
Wall attachment: Back wall with 4 drillings Ø 9 mm for installation of wall mounting brackets.
Stainless steel 1.4301 outside brushed finish.
Technical Data
- Order No.: 3351-2030-12-00
- Type: without mounting plate
- Material: Stainless steel
- width: 200 mm
- height: 300 mm
- depth: 125 mm
- Weight: 4.31 kg
- Sheet thickness: Body: 1,5 mm
Door: 1,5 mm - Maximum installation: depth of 16 or 24 mm with edged mounting panel (20 mm)
- Protective ground connection: according to DIN EN 61439-1
- Surface finish: outside brushed finish
- Lock: completely made of stainless steel
- Approvals: cULus
- Protection type: IP66, Type 1, 2, 4X, 5, 12; Optional 3, 3R
Notice
- Closure using a compact handle, (for profile half cylinder). Other modifications on request.
Scope of Delivery
- Enclosure complete, fixing kit for grounding as well as one key.
Accessories
Accessories enclosures
Doors

Replacement door for stainless steel enclosures of Series 33
Suitable for width | 200 mm |
Suitable for height | 300 mm |
Material | Stainless steel |
Version | Single door |
Lock

Compact handle for Profile half cylinder
Material | Handle: Polyamide GF 30 %, black. Body: GD-Zn, untreated. Latch and mounting hardware: Steel, galvanized |
Locking height (b) | 20 mm |
Latch length (L) | 45 mm |
Protection class | IP65 |
Mounting plates
Grounding

Cable for protective ground connection
Length L | 220 mm |
Drilling diameter d | 6.5 mm |
Cross-section | 6 mm² |

Cable for protective ground connection
Length L | 370 mm |
Drilling diameter d | 6.5 mm |
Cross-section | 6 mm² |