Wall enclosure landscape format, sheet steel
Key Features
- Degree of protection IP55
- 180° concealed hinges
- Stable frame 26,5 mm wide
- Narrow door gap
- Doors top change without drilling
- Large usable depth max. d-16 mm
Product Description
Wall enclosure with 1-wing resp. 2-wing door
With mounting plate
Protective ground connection with DIN EN 61439-1, studs M6 x 16 at door(s) and corpus
Double over-stamped frame and narrow door gap avoid entry of dirt and water when opening door
Door(s) with continuously foamed sealing, in case of 1-wing door: version on the right and on the left attachable, standard stop on the right, standard stop change without drilling, in case of 2-wing version: right door wing overlapped.
Concealed hinges, out of steel, opening angle 180°
Closure: 3-point locking, standard actuation 3mm two-way key bit
Door(s) both-sided with reinforcing strip/perforated section with anchor points in 25 mm grid for screws size M5
Floor with inside plate(s) for cables out made of sendzimir galvanized steel sheet, all-round tilted, sealing by means of PU-foam (usable space per plate for cables: 500 x 125 mm) fixed on bolts M6 x 16
Mounting plate on back wall fixed on bolts M8 x 30, floor with mounting profiles
Wall mounting: back wall with 4 drills Ø 9 mm
Technical Data
- Order No.: 3339-8070-40-17
- Bottom with: 1 cut-out 500x125 mm (19.69 x4.92") with 6 attachment studs M6x16, distance between cut-out and rear panel 50 mm (1,97")
- Type: single door
- Door: hinged on the right
- Material: Sheet steel
- width: 800 mm
- height: 700 mm
- depth: 400 mm
- Weight: 40.1 kg
- Number of cable entry plates: 1
- Sheet thickness: Body: 1,5 mm
Door: 1,5 mm - Maximum installation: depth of d-12 resp. d-24 mm in case of tilted mounting plate (20 mm)
- Protective ground connection: according to DIN EN 61439-1
- Surface finish: Powder coating RAL 7035, texture finish, plate(s) for cables out made of sendzimir galvanized steel sheet
- Lock: plastic housing, locking bolt: GDZn black, latch: galvanized
- Moungting panel: sendzimir galvanized, 2,5 mm, ab B-1000 mm tilted 20 mm
- Constructed according to: IP 55, meets technical requirements according to Type 12
Notice
- Closure using a compact handle, (for profile half cylinder). Other modifications on request.
Scope of Delivery
- Enclosure complete with mounting plate and its fixing parts, as well as 1 key. Depending on the dimensions with cable entry plate(s)
Accessories
Holding open
Opening limiters
Accessories enclosures
Doors
Replacement door wall-mount enclosures landscape format type 3339 made of sheet steel
| Suitable for width | 800 mm |
| Suitable for height | 700 mm |
| Material | Sheet steel |
| Version | Single door |
Lock
Compact handle for Profile half cylinder
| Material | Handle: Polyamide GF 30 %, black. Body: GD-Zn, untreated. Latch and mounting hardware: Steel, galvanized |
| Locking height (b) | 20 mm |
| Latch length (L) | 45 mm |
| Protection class | IP65 |
Mounting plates
Mounting plate landscape format
| Suitable for width | 800 mm |
| Suitable for height | 700 mm |
19" elements
Pockets
Universal accessories
Door Switch for Wall-Mount Enclosures Serie 33 / H335 Console
| Contact | 1 Normally open, 1 normally closed |
| Housing and lid | Glass fiber reinforced plastic (UL 94-V0) |
| Utilization category | AC-15, Ue/le 240V/3A |
| Rated operating voltage | Ue 240V |
