Air Hydraulic Pump
Product Description
For operating single-acting hydraulic cylinder
A compressed air connection of 6 bar generates an operating pressure of 500 bar
Foot pedal operated
Due to its low weight, the pump is suitable for mobile use
Technical Data
- Order No.: 2612-7500-00-00
- Application: For operating häwa tools
- Air connection: factory-set to min. 6 bar
- Operating pressure: 500 bar
- Noise level: 75 dB(A)
- Weight: 6.8 kg
- Capacity: 0.8 l/min
- Hose length: 3500 mm
- LUFTVERBRAUCH: 0.4 m³/min
- Usable oil capacity: 2.1 l
Notice
- Suitable for operating häwa tools with appropriate drip-free quick release coupling.
- Operation of several tools via switch valve type 2611-0003-03-00.
Scope of Delivery
- Air hydraulic pump with hydraulic hose and hose fitting
Accessories
Accessories Hydraulic Pumps
Hydraulic fittings

2611-7102-04-00
Plug-In Coupling
Product range | For workshop equipment |
Max. operating pressure | max. 1000 bar |
Flow capacity | 6 l/min |
Connection thread | 1/4" NPT IG |

2611-7102-05-00
Plug-In Nipple
Product range | For workshop equipment |
Max. operating pressure | max. 1000 bar |
Flow capacity | 6 l/min |
Connection thread | 1/4" NPT IG |
Hydraulic hoses

2611-0101-20-00
Hydraulic Hose for Electrical Pumps
Product range | For workshop equipment |
Max. operating pressure | max. 700 bar |
Connection thread | 1x 1/4“ NPT Male Thread + 1x DKOS10 with M18x1.5 union nut |
Other hydraulic accessories

2611-0003-03-00
Switch Valve
Product range | For workshop equipment |
Operating pressure | max. 500 bar |
Connection thread | 3x 1/4“ NPT IG |
Suitable for
Bus Bar Processing

2605-7102-00-02
AlCu-Press Complete
Suitable for | round punches up to ø 17 mm / 0.67 inch oblong holes up to 13x22 mm / 0.51x0.87 inch |
Max. sheet metal thickness | Cross section: copper up to 12x120 mm / 0.47x4.72”; aluminum up to 12x120 mm / 0.47x4.72” |
Material up to a cross section of | 12x120 mm/0,47x4,72" |
Depth stop | Adjustable from 8 to 85 mm / 0.32x3.35” |

2605-7502-00-02
AlCu-Press: Punching / Cutting to Length
Application | Punching of cut-outs |
Suitable for | round punches up to ø 17 mm / 0.67 inch oblong holes up to 13x22 mm / 0.51x0.87 inch |
Material | Copper, aluminum |
Material thickness | Cross section: copper up to 12x120 mm / 0.47x4.72”; aluminum up to 12x120 mm / 0.47x4.72” |

2605-7602-01-20
AlCu-Press: Bending, Trimming
Application | Bending + trimming |
Material thickness | Cross section: copper up to 12x120 mm / 0.47x4.72”; aluminum up to 12x120 mm / 0.47x4.72” |
Punching Tools

2643-7105-00-00
Hydraulic Maxi-Press 500
Suitable for | round punches up to ø 63.5 mm; 2.5" / square punches up to 46 mm; 1.81" / rectangular punches up to 60 mm; 2.36" diagonal |
Max. sheet metal thickness | Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 4 mm; 6 ga |
Processing depth | 500 mm |
Punch holder (diameter) | 20 mm |

2643-7106-00-00
Hydraulic Maxi-Press 500 with center point indicator
Suitable for | round punches up to ø 63.5 mm; 2.5" / square punches up to 46 mm; 1.81" / rectangular punches up to 60 mm; 2.36" diagonal |
Max. sheet metal thickness | Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 4 mm; 6 ga |
Processing depth | 500 mm |
Punch holder (diameter) | 20 mm |

2662-7205-00-01
Hydraulic Quick-Press 300
Suitable for | round punches up to ø 40.5 mm; 1,59" / square punches up to 25.4 mm; 1" / rectangular punches up to 36 mm; 1.42" diagonal |
Max. sheet metal thickness | Sheet steel to 2 mm; 14 ga / Stainless steel to 1,5 mm; 16 ga / Aluminum to 3 mm; 9 ga |
Processing depth | 300 mm |
Punch holder (diameter) | 13 mm |

2662-7206-00-01
Hydraulic Quick-Press 300 with center point indicator
Suitable for | round punches up to ø 40.5 mm; 1,59" / square punches up to 25.4 mm; 1" / rectangular punches up to 36 mm; 1.42" diagonal |
Max. sheet metal thickness | Sheet steel to 2 mm; 14 ga / Stainless steel to 1,5 mm; 16 ga / Aluminum to 3 mm; 9 ga |
Processing depth | 300 mm |
Punch holder (diameter) | 13 mm |
Cutting Tools

2671-0200-01-00
Hydraulic profile shears 2671
Material | Sheet steel, aluminum |
Material thickness | Profile dimensions: sheet steel up to 35x15x2 mm / 1.38x0.59x0.08”, aluminum up to 35x15x2 mm /1.38x0.59x0.08” |
Punching | Up to ø 7 mm / 0.28“ or oblong hole 6.3x9 mm / 0.25x0.35“ |

2675-7200-01-00
Profile shears 2675
Material | Sheet steel, aluminum |
Punching | Up to ø 13 mm / 0.51“ or oblong hole 9x13 mm / 0.35x0.51“ |
spare parts

2611-0101-20-00
Hydraulic Hose for Electrical Pumps
Product range | For workshop equipment |
Max. operating pressure | max. 700 bar |
Connection thread | 1x 1/4“ NPT Male Thread + 1x DKOS10 with M18x1.5 union nut |

2611-7102-05-00
Plug-In Nipple
Product range | For workshop equipment |
Max. operating pressure | max. 1000 bar |
Flow capacity | 6 l/min |
Connection thread | 1/4" NPT IG |