Round Punches with 40 mm External Die Diameter
Key Features
- Long lifetime
- Maximum productivity with minimum effort
Product Description
For the use in bow punches
Low tool wear through optimum cutting geometry
Quick, precise and burr-free punching
Technical Data
- Order No.: 2680-0220-20-00
- Max. sheet metal thickness: Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 3,5 mm; 9 ga - see note
- Product range: For workshop equipment
- Version: For Quick-Press 300
- Diameter dimensions: 20.2 mm
- Die - external diameter: 40 mm
- Metrical: 20
Notice
- ATTENTION: The lower value shown in the technical data of the punching tool and the bow punch specifies the maximum possible sheet metal thickness.
- Before selecting this punch, check if you already have the required die holder (ø 40 mm).
- For further product information, see "Downloads".
Scope of Delivery
- 1 round punch, consisting of punch and die
Accessories
Accessories Punching Tools
Punches
Round punches (workshop equipment)
2680-0900-20-20
Round Punch Rubber Wipers for Bow Punches
| Product range | For workshop equipment |
| For punch size | 20.2 mm |
Accessories for Bow Punches
Accessories Quick-Press 300
2680-0340-00-00
Die Holder ø 40 mm for Quick-Press 300
| Product range | For workshop equipment |
| Clamping pin | ø 13 mm/0,51" |
| Type | die with 40 mm external diameter |
Accessories for sheet metal processing
Suitable for
Punching Tools
2662-7203-00-01
Manually Operated Hydraulic Quick-Press 300
| Suitable for | round punches up to ø 40.5 mm; 1,59" / square punches up to 25.4 mm; 1" / rectangular punches up to 36 mm; 1.42" diagonal |
| Max. sheet metal thickness | Sheet steel to 2 mm; 14 ga / Stainless steel to 1,5 mm; 16 ga / Aluminum to 3 mm; 9 ga |
| Punching force | 45 kN |
2662-7205-00-01
Hydraulic Quick-Press 300
| Suitable for | round punches up to ø 40.5 mm; 1,59" / square punches up to 25.4 mm; 1" / rectangular punches up to 36 mm; 1.42" diagonal |
| Max. sheet metal thickness | Sheet steel to 2 mm; 14 ga / Stainless steel to 1,5 mm; 16 ga / Aluminum to 3 mm; 9 ga |
| Processing depth | 300 mm |
| Punch holder (diameter) | 13 mm |
2662-7206-00-01
Hydraulic Quick-Press 300 with center point indicator
| Suitable for | round punches up to ø 40.5 mm; 1,59" / square punches up to 25.4 mm; 1" / rectangular punches up to 36 mm; 1.42" diagonal |
| Max. sheet metal thickness | Sheet steel to 2 mm; 14 ga / Stainless steel to 1,5 mm; 16 ga / Aluminum to 3 mm; 9 ga |
| Processing depth | 300 mm |
| Punch holder (diameter) | 13 mm |
