Round Punch Plus Threaded for ø 11.1 mm Draw Studs
Key Features
- Long lifetime
- Maximum productivity with minimum effort
- Particularly for punching aluminum sheets
Product Description
For punching with "mobile devices".
It is possible to punch stainless steel and sheet steel
Low tool wear through optimum cutting geometry.
Owing to the design of the punch cutting edges, the power required for punching is reduced by up to 40 %.
Easy removal of the waste piece, split up to a diameter of 32.5 mm / 1.28.
Quick, precise and burr-free punching.
Technical Data
- Order No.: 2682-0818-60-25
- Max. sheet metal thickness: Stainless steel 2 mm; 14 ga
- Product range: for mobile devices
- Pilot hole Ø: 12.2 mm
- Diameter dimensions: 18.6 mm
- PG: 11
Notice
- You need a häwa punching pump or a häwa hydraulic cylinder. If this hole tool is compatible with your häwa punching unit, please refer to the "Tool hint - Hole punch for mobile devices" under "Downloads".
- The max. sheet metal thickness to be punched is also dependent on the punching device.
Scope of Delivery
- 1 round punch, consisting of punch and die
Accessories
Accessories Punching Tools
Accessories for sheet metal processing
Suitable for
Accessories
Accessories Punching Tools
Accessories for Punching Pumps
Mobile hydraulic cylinders
2611-7600-01-00
Hydraulic Cylinder Power 19
| Product range | for mobile devices |
| Suitable for | Round punches up to ø 135 mm; 5.31“ / square punches 103 mm; 4.06“ / rectangular punches up to a diagonal size of 145 mm; 5.71“ |
| Max. sheet metal thickness | Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 4 mm; 6 ga |
| Screw receptacle | 19 mm (3/4”) draw studs |
2611-7600-02-00
Hydraulic Cylinder Power 25
| Product range | for mobile devices |
| Suitable for | Round punches up to ø 185 mm; 7.28“ / square punches 140 mm; 5.51“ / rectangular punches up to a diagonal size of 195 mm; 7.68“ |
| Max. sheet metal thickness | Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 4 mm; 6 ga |
| Screw receptacle | Thread M25 x 1,5 |
2684-7600-01-00
Hydraulic Cylinder 19 (3/4”)
| Product range | for mobile devices |
| Suitable for | round punches up to ø 120 mm; 4.72" / square punches 92 mm; 3.62" / rectangular punches up to 138 mm; 5.43" diagonal |
| Max. sheet metal thickness | Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 4 mm; 6 ga |
| Screw receptacle | 19 mm (3/4”) draw studs |
Draw Studs and Nuts
Draw studs for manual operation
Punching Tools
2622-7200-02-00
Powerman Junior
| Type | without round punches |
| Suitable for | round punches up to ø 50.5 mm; 1.99" / square punches up to 25.4 mm; 1" / rectangular punches up to 37.5 mm; 1.48" diagonal |
| Max. sheet metal thickness | Sheet steel to 2 mm; 14 ga / Stainless steel to 1,5 mm; 16 ga / Aluminum to 3 mm; 9 ga |
| Punching force | 40 kN |
2622-7204-02-01
Powerman Junior
| Type | with metric round punch kit |
| Suitable for | round punches up to ø 50.5 mm; 1.99" / square punches up to 25.4 mm; 1" / rectangular punches up to 37.5 mm; 1.48" diagonal |
| Max. sheet metal thickness | Sheet steel to 2 mm; 14 ga / Stainless steel to 1,5 mm; 16 ga / Aluminum to 3 mm; 9 ga |
| Punching force | 40 kN |
2626-7200-01-00
Powerman Vario
| Type | without round punches in sheet metal case |
| Suitable for | round punches up to ø 80 mm; 3.15" / square punches up to 60 mm; 2.36" / rectangular punches up to 85 mm; 3.35" diagonal |
| Max. sheet metal thickness | Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 4 mm; 6 ga |
| Punching force | 50 kN |
2626-7206-01-00
Powerman Vario
| Type | PG1 with round punches from PG9 to PG21 in plastic case |
| Suitable for | round punches up to ø 80 mm; 3.15" / square punches up to 60 mm; 2.36" / rectangular punches up to 85 mm; 3.35" diagonal |
| Max. sheet metal thickness | Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 4 mm; 6 ga |
| Punching force | 50 kN |
2626-7206-02-00
Powerman Vario
| Type | PG2 with round punches from PG9 to PG29 in plastic case |
| Suitable for | round punches up to ø 80 mm; 3.15" / square punches up to 60 mm; 2.36" / rectangular punches up to 85 mm; 3.35" diagonal |
| Max. sheet metal thickness | Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 4 mm; 6 ga |
| Punching force | 50 kN |
2626-7207-01-01
Powerman Vario
| Type | with metric round punches from M12 to M50 in plastic case |
| Suitable for | round punches up to ø 80 mm; 3.15" / square punches up to 60 mm; 2.36" / rectangular punches up to 85 mm; 3.35" diagonal |
| Max. sheet metal thickness | Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 4 mm; 6 ga |
| Punching force | 50 kN |
2629-7200-01-01
Powerlec Vario
| Type | with metric round punch kit |
| Suitable for | round punches up to ø 80 mm, 3.15" / square punches up to 68 mm; 2.68" / rectangular punches up to 96 mm; 3.78" diagonal |
| Max. sheet metal thickness | Sheet steel to 2,5 mm; 12 ga / Stainless steel to 2 mm; 14 ga / Aluminum to 4 mm; 6 ga |
| Punching force | 60 kN |
2629-7400-00-00
Powerlec Vario Plus
| Suitable for | round punches up to ø 120 mm; 4.72" Square punches 125 mm; 4.92" Rectangular punches up to 175 mm; 6.89" diagonal |
| max. sheet metal thickness | Sheet steel up to 2 mm; 14 ga Stainless steel up to 1,5 mm; 16 ga |
| Punching force | 63 kN |
| Operating voltage | 18V |
2629-7400-01-00
Powerlec Vario Plus
| Suitable for | round punches up to ø 120 mm; 4.72" Square punches 125 mm; 4.92" Rectangular punches up to 175 mm; 6.89" diagonal |
| max. sheet metal thickness | Sheet steel up to 2 mm; 14 ga Stainless steel up to 1,5 mm; 16 ga |
| Punching force | 63 kN |
| Operating voltage | 18V |
2629-7401-00-00
Powerlec Vario Plus
| Type | Fan kit 92 |
| Suitable for | round punches up to ø 120 mm; 4.72" Square punches 125 mm; 4.92" Rectangular punches up to 175 mm; 6.89" diagonal |
| max. sheet metal thickness | Sheet steel up to 2 mm; 14 ga Stainless steel up to 1,5 mm; 16 ga |
| Punching force | 63 kN |
| Operating voltage | 18V |
2629-7402-00-00
Powerlec Vario Plus
| Type | Fan kit 125 |
| Suitable for | round punches up to ø 120 mm; 4.72" Square punches 125 mm; 4.92" Rectangular punches up to 175 mm; 6.89" diagonal |
| max. sheet metal thickness | Sheet steel up to 2 mm; 14 ga Stainless steel up to 1,5 mm; 16 ga |
| Punching force | 63 kN |
| Operating voltage | 18V |
2684-7100-01-01
Powerman
| Suitable for | round punches up to ø 120 mm; 4.72" / square punches 92 mm; 3.62" / rectangular punches up to 138 mm; 5.43" diagonal |
| Max. sheet metal thickness | Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 4 mm; 6 ga |
| Punching force | 65 kN |
2685-7200-01-01
Powerman Step
| Suitable for | round punches up to ø 120 mm; 4.72" / square punches 92 mm; 3.62" / rectangular punches up to 138 mm; 5.43" diagonal |
| Max. sheet metal thickness | Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 4 mm; 6 ga |
| Punching force | 65 kN |
