Modular cabinets Stainless steel H375, single door
Key Features
- Stainless steel
- Modular cabinet
- Depth-400 mm
- Protection class IP/Nema/Type: see technical data
- System accessories permit modular extension
Product Description
Modular cabinets with single or double door design. Available with or without mounting plate.
Protective grounding according to DIN EN 61439-1, M8x20 studs on all movable and detachable parts as well as on top and bottom frame areas, mounting plate with ground connector screw and cable entry plates with drilling.
Flanged edges prevent dust and water from entering when opening the door
Doors with seamlessly foamed gasket can be mounted either at left or right side, standard delivery includes doors hinged on right side, Opening angle 120° can be modified to 180°, Locking: Bar lock standard, with 3 mm double mandrel bolt, Bolted reinforcement and attachment frame of solid square tubes perforated with 4.5 mm holes every 25 mm, From width 800 mm with stop roller
Top plate can be removed, with 4 lifting eyes M12 to DIN 580
Bottom with three-part, adjustable cable entry plate and 10.6 mm mounting holes.
C-flanged mounting plate, adjustable to depth every 25 mm; quick and easy mounting with häwa locking brackets; continuous mounting surface in second rearmost position
Technical Data
- Order No.: 0375-1012-40-10
- Protective ground connection: according to DIN EN 61439-1
- Protection type: IP55
Type 1, 12 - Material: Stainless steel AISI 304 / 1.4301
- Approval: cULus
-
Dimensions (WxHxD): 1000 mm 1200 mm Depth : 400 mm
- Cabinet type: Modular cabinets
- Type: with mounting plate
- Surface: Externally brushed
- Sheet thickness: Door: 2 mm(ga)
Roof angle: 2 mm(ga)
Carrier angle ground group: 2,5 mm(ga)
Frame/Body: 2 mm(ga)
Rear wall: 1,5 mm(ga)
Moungting panel: 2,5 mm(ga)
Notice
- Rear side with hinged door or other modifications upon request.
- Please refer to base drawings for base mounting dimensions.
- IP56 is achieved when used together with enhancement kit type 0396-7056-01-00 for side panels.
Scope of Delivery
- Cabinet complete with hinged front door, bolted rear panel, lifting eyes, top cable entry plate and one key
Accessories
Accessories UL Type 3R, 12
Accessories Stainless steel
Side panel/Bases
0376-7012-40-61
Side panel H375
| Suitable for height | 1200 mm |
| Suitable for depth | 400 mm |
| Material | Stainless steel AISI 304 / 1.4301 |
0376-1001-40-11
Bases height 100 mm/3.94" for cabinets type H370 and H375
| Suitable for width | 1000 mm |
| Suitable for depth | 400 mm |
| Material | Stainless steel AISI 304 / 1.4301 |
| Socket size | 350 mm |
0376.1002.40.11
Base height 200 mm/7.87" for cabinets type H370 and H375
| Suitable for width | 1000 mm |
| Suitable for depth | 400 mm |
| Material | Stainless steel AISI 304 / 1.4301 |
| Socket size | 350 mm |
Doors/Rear wall
0375-1012-00-90
Replacement door for stainless steel cabinets type H370/H375
| Suitable for cabinet width | 1000 mm |
| Suitable for cabinet height | 1200 mm |
| Material | Stainless steel |
| Version | Single door |
Universal Accessories / Accessories for Internal Mounting
Mounting plate
Mounting rail
Grounding/EMC
3080-9036-16-20
Cable for protective ground connection
| Length L | 220 mm |
| Drilling diameter d | 8.5 mm |
| Cross-section | 16 mm² |
3080-9036-16-35
Cable for protective ground connection
| Length L | 370 mm |
| Drilling diameter d | 8.5 mm |
| Cross-section | 16 mm² |
Lighting
3080-7041-61-95
Door Switch for Cabinets H3X0/H3X5
| Contact | 1 Normally open, 1 normally closed |
| Housing and lid | Glass fiber reinforced plastic (UL 94-V0) |
| Utilization category | AC-15, Ue/le 240V/3A |
| Rated operating voltage | Ue 240V |
3080-0041-13-01
Door Contact Switch
| Design | Change-over (co = closed open) |
| Mounting | Screw fixing M5 |
| Max. switching capacity | AC 250 V, 8 (1.5) A |
| Connection | 4-pole terminal, max. tightening torque 0.5 Nm |
3080-0041-13-02
Door Contact Switch
| Design | Opener (nc=normally closed) |
| Mounting | Screw fixing M5 |
| Max. switching capacity | AC 250 V, 8 (1.5) A |
| Connection | 4-pole terminal, max. tightening torque 0.5 Nm |
3080-7006-12-07
Mounting kit for lamps
| Ausführung | Sheet steel cover plate: Powder coating RAL 7035, texture finish |
| Width | 65 mm |
| Height | 1 mm |
| Length | 440 mm |
Transport/Modular assembly
Cable routing/-mounting/-storage
2070-9102-34-00
Clip-nuts
| Thread | M 4 |
| Suitable for sheet metal thickness | 0,7 - 1,6 mm/0,03 - 0,06" |
| for cut-out size | 9,5x9,5 mm/0,37x0,37" |
| Variante | Sheet steel, without grounding pin |
2070-9102-35-00
Clip-nuts
| Thread | M 5 |
| Suitable for sheet metal thickness | 0,7 - 1,6 mm/0,03 - 0,06" |
| for cut-out size | 9,5x9,5 mm/0,37x0,37" |
| Variante | Sheet steel, without grounding pin |
2070-9202-35-00
Clip-nuts
| Thread | M 5 |
| Suitable for sheet metal thickness | 0,7 - 1,6 mm/0,03 - 0,06" |
| for cut-out size | 9,5x9,5 mm/0,37x0,37" |
| Variante | Stainless steel, without grounding pin |
2070-9102-45-01
Clip-nuts
| Thread | M 5 |
| Suitable for sheet metal thickness | 1,5 - 2,0 mm |
| for cut-out size | 9,5x9,5 mm/0,37x0,37" |
| Variante | Sheet steel, with grounding pin |
2070-9102-35-02
Clip-nuts
| Thread | M 5 |
| Suitable for sheet metal thickness | 1,7 - 2,7 mm |
| for cut-out size | 9,5x9,5 mm/0,37x0,37" |
| Variante | Sheet steel, without grounding pin |
2070-9202-35-02
Clip-nuts
| Thread | M 5 |
| Suitable for sheet metal thickness | 1,7 - 2,7 mm |
| for cut-out size | 9,5x9,5 mm/0,37x0,37" |
| Variante | Stainless steel, without grounding pin |
2070-9102-35-03
Clip-nuts
| Thread | M 5 |
| Suitable for sheet metal thickness | 2,8 - 3,5 mm |
| for cut-out size | 9,5x9,5 mm/0,37x0,37" |
| Variante | Sheet steel, without grounding pin |
2070-9202-35-03
Clip-nuts
| Thread | M 5 |
| Suitable for sheet metal thickness | 2,8 - 3,5 mm |
| for cut-out size | 9,5x9,5 mm/0,37x0,37" |
| Variante | Stainless steel, without grounding pin |
2070-9102-36-00
Clip-nuts
| Thread | M 6 |
| Suitable for sheet metal thickness | 0,7 - 1,6 mm/0,03 - 0,06" |
| for cut-out size | 9,5x9,5 mm/0,37x0,37" |
| Variante | Sheet steel, without grounding pin |
2070-9202-36-00
Clip-nuts
| Thread | M 6 |
| Suitable for sheet metal thickness | 0,7 - 1,6 mm/0,03 - 0,06" |
| for cut-out size | 9,5x9,5 mm/0,37x0,37" |
| Variante | Stainless steel, without grounding pin |
2070-9102-46-00
Clip-nuts
| Thread | M 6 |
| Suitable for sheet metal thickness | 0,9 - 1,9 mm |
| for cut-out size | 9,5x9,5 mm/0,37x0,37" |
| Variante | Sheet steel, with grounding pin |
2070-9102-46-01
Clip-nuts
| Thread | M 6 |
| Suitable for sheet metal thickness | 1,5 - 2,0 mm |
| for cut-out size | 9,5x9,5 mm/0,37x0,37" |
| Variante | Sheet steel, with grounding pin |
2070-9102-46-02
Clip-nuts
| Thread | M 6 |
| Suitable for sheet metal thickness | 1,8 - 2,9 mm |
| for cut-out size | 9,5x9,5 mm/0,37x0,37" |
| Variante | Sheet steel, with grounding pin |
2070-9102-36-02
Clip-nuts
| Thread | M 6 |
| Suitable for sheet metal thickness | 1,7 - 2,7 mm |
| for cut-out size | 9,5x9,5 mm/0,37x0,37" |
| Variante | Sheet steel, without grounding pin |
2070-9202-36-02
Clip-nuts
| Thread | M 6 |
| Suitable for sheet metal thickness | 1,7 - 2,7 mm |
| for cut-out size | 9,5x9,5 mm/0,37x0,37" |
| Variante | Stainless steel, without grounding pin |
2070-9203-36-03
Clip-nuts
| Thread | M 6 |
| Suitable for sheet metal thickness | 1,8 - 3,2 mm |
| for cut-out size | 12,3x12,3 mm/0,48x0,48" |
| Variante | Stainless steel, without grounding pin |
2070-9102-36-03
Clip-nuts
| Thread | M 6 |
| Suitable for sheet metal thickness | 2,8 - 3,5 mm |
| for cut-out size | 9,5x9,5 mm/0,37x0,37" |
| Variante | Sheet steel, without grounding pin |
2070-9202-36-03
Clip-nuts
| Thread | M 6 |
| Suitable for sheet metal thickness | 2,8 - 3,5 mm |
| for cut-out size | 9,5x9,5 mm/0,37x0,37" |
| Variante | Stainless steel, without grounding pin |
2070-9102-46-03
Clip-nuts
| Thread | M 6 |
| Suitable for sheet metal thickness | 2,8 - 3,5 mm |
| for cut-out size | 9,5x9,5 mm/0,37x0,37" |
| Variante | Sheet steel, with grounding pin |
Hold up
3080-7109-87-00
Door opening limiter for H390/H395, H370/H375
| Surface | Galvanized |
| Material | Sheet steel |
| suitable for type | H390/H395 and H370/H375 from door width 500 mm |
3080-7109-87-01
Door opening limiter for H390/H395, H370/H375
| Surface | Galvanized |
| Material | Sheet steel |
| suitable for type | H390/H395 and H370/H375 from door less than 500 mm |
