Free-Standing cabinets Stainless Steel H370, double door
Key Features
- Stainless steel
- Free-standing cabinet
- Depth-400 mm
- Protection class IP/Nema/Type: see technical data
- System accessories permit modular extension
Product Description
Free-standing cabinets with single or double door design. Available with or without mounting plate. Mounting rails for 100 % utilization of häwa accessories available as option.
Protective grounding according to DIN EN 61439-1, M8x20 studs on all movable and detachable parts as well as on top and bottom frame areas, mounting plate with ground connector screw and cable entry plates with drilling
Flanged edges prevent dust and water from entering when opening the door
Doors with seamlessly foamed gasket can be mounted either at left or right side, standard delivery includes doors hinged on right side, Opening angle 120° can be modified to 180°, Locking: Bar lock, standard with 3 mm double mandrel bolt, Bolted reinforcement and attachment frame of solid square tubes perforated with 4.5 mm holes every 25 mm, Underlapping door with additional lock, From width 800 mm with stop roller
Top plate can be removed, with 4 lifting eyes M12 to DIN 580
Bottom with three-part, adjustable cable entry plate and 10.6 mm mounting holes.
C-flanged mounting plate, adjustable to depth every 25 mm; quick and easy mounting with häwa locking brackets.
Technical Data
- Order No.: 0370-1210-40-10
- Protective ground connection: according to DIN EN 61439-1
- Protection type: IP55
Type 1, 12 - Material: Stainless steel AISI 304 / 1.4301
- Approval: cULus
-
Dimensions (WxHxD): 1200 mm 1000 mm Depth : 400 mm
- Weight: 105.5 kg
- Cabinet type: Free standing cabinets
- Type: with mounting plate
- Surface: Externally brushed
- Sheet thickness: Door: 2 mm(ga)
Roof angle: 2 mm(ga)
Carrier angle ground group: 2,5 mm(ga)
Frame/Body: 1,5 mm(ga)
Rear wall: 1,5 mm(ga)
Moungting panel: 3 mm(ga)
Notice
- Rear panel with hinged door or other modifications involve delivery time. Price upon request.
- Attention: Center attachment type 0391-0003-..-00 cannot be combined with vertical mounting rails type 0391-90..-00-03.
- Modular assembly is achieved by using the horizontal/vertical mounting rails.
- Please refer to base drawings for base mounting dimensions.
Scope of Delivery
- Cabinet complete with lifting eyes, top plate, bottom cable entry plate and 1 key
Accessories
Accessories Stainless steel
Side panel/Bases
Bases height 100 mm/3.94" for cabinets type H370 and H375
Suitable for width | 1200 mm |
Suitable for depth | 400 mm |
Material | Stainless steel AISI 304 / 1.4301 |
Socket size | 350 mm |
100 mm / 3.94" high base, only for H370 cabinets (flush at the rear side)
Suitable for width | 1200 mm |
Suitable for depth | 400 mm |
Material | Stainless steel AISI 304 / 1.4301 |
Socket size | 375 mm |
Base height 200 mm/7.87" for cabinets type H370 and H375
Suitable for width | 1200 mm |
Suitable for depth | 400 mm |
Material | Stainless steel AISI 304 / 1.4301 |
Socket size | 350 mm |
200 mm / 7.87" high base, only for H370 cabinets (flush at the rear side)
Suitable for width | 1200 mm |
Suitable for depth | 400 mm |
Material | Stainless steel AISI 304 / 1.4301 |
Socket size | 375 mm |
Doors/Rear wall
Replacement door for stainless steel cabinets type H370/H375
Suitable for cabinet width | 1200 mm |
Suitable for cabinet height | 1000 mm |
Material | Stainless steel |
Version | Left door of double door set |
Replacement door for stainless steel cabinets type H370/H375
Suitable for cabinet width | 1200 mm |
Suitable for cabinet height | 1000 mm |
Material | Stainless steel |
Version | right |
Replacement door for stainless steel cabinets type H370/H375
Suitable for cabinet width | 1200 mm |
Suitable for cabinet height | 1000 mm |
Material | Stainless steel |
Version | Double door set |
Universal Accessories / Accessories for Internal Mounting
Grounding/EMC
Cable for protective ground connection
Length L | 220 mm |
Drilling diameter d | 8.5 mm |
Cross-section | 16 mm² |
Cable for protective ground connection
Length L | 370 mm |
Drilling diameter d | 8.5 mm |
Cross-section | 16 mm² |
Lighting
Door Switch for Cabinets H3X0/H3X5
Contact | 1 Normally open, 1 normally closed |
Housing and lid | Glass fiber reinforced plastic (UL 94-V0) |
Utilization category | AC-15, Ue/le 240V/3A |
Rated operating voltage | Ue 240V |
Door Contact Switch
Design | Change-over (co = closed open) |
Mounting | Screw fixing M5 |
Max. switching capacity | AC 250 V, 8 (1.5) A |
Connection | 4-pole terminal, max. tightening torque 0.5 Nm |
Door Contact Switch
Design | Opener (nc=normally closed) |
Mounting | Screw fixing M5 |
Max. switching capacity | AC 250 V, 8 (1.5) A |
Connection | 4-pole terminal, max. tightening torque 0.5 Nm |
Mounting kit for lamps
Ausführung | Sheet steel cover plate: Powder coating RAL 7035, texture finish |
Width | 65 mm |
Height | 1 mm |
Length | 440 mm |
Transport/Modular assembly
Cable routing/-mounting/-storage
Clip-nuts
Thread | M 4 |
Suitable for sheet metal thickness | 0,7 - 1,6 mm/0,03 - 0,06" |
for cut-out size | 9,5x9,5 mm/0,37x0,37" |
Variante | Sheet steel, without grounding pin |
Clip-nuts
Thread | M 5 |
Suitable for sheet metal thickness | 0,7 - 1,6 mm/0,03 - 0,06" |
for cut-out size | 9,5x9,5 mm/0,37x0,37" |
Variante | Sheet steel, without grounding pin |
Clip-nuts
Thread | M 5 |
Suitable for sheet metal thickness | 0,7 - 1,6 mm/0,03 - 0,06" |
for cut-out size | 9,5x9,5 mm/0,37x0,37" |
Variante | Stainless steel, without grounding pin |
Clip-nuts
Thread | M 5 |
Suitable for sheet metal thickness | 1,5 - 2,0 mm |
for cut-out size | 9,5x9,5 mm/0,37x0,37" |
Variante | Sheet steel, with grounding pin |
Clip-nuts
Thread | M 5 |
Suitable for sheet metal thickness | 1,7 - 2,7 mm |
for cut-out size | 9,5x9,5 mm/0,37x0,37" |
Variante | Sheet steel, without grounding pin |
Clip-nuts
Thread | M 5 |
Suitable for sheet metal thickness | 1,7 - 2,7 mm |
for cut-out size | 9,5x9,5 mm/0,37x0,37" |
Variante | Stainless steel, without grounding pin |
Clip-nuts
Thread | M 5 |
Suitable for sheet metal thickness | 2,8 - 3,5 mm |
for cut-out size | 9,5x9,5 mm/0,37x0,37" |
Variante | Sheet steel, without grounding pin |
Clip-nuts
Thread | M 5 |
Suitable for sheet metal thickness | 2,8 - 3,5 mm |
for cut-out size | 9,5x9,5 mm/0,37x0,37" |
Variante | Stainless steel, without grounding pin |
Clip-nuts
Thread | M 6 |
Suitable for sheet metal thickness | 0,7 - 1,6 mm/0,03 - 0,06" |
for cut-out size | 9,5x9,5 mm/0,37x0,37" |
Variante | Sheet steel, without grounding pin |
Clip-nuts
Thread | M 6 |
Suitable for sheet metal thickness | 0,7 - 1,6 mm/0,03 - 0,06" |
for cut-out size | 9,5x9,5 mm/0,37x0,37" |
Variante | Stainless steel, without grounding pin |
Clip-nuts
Thread | M 6 |
Suitable for sheet metal thickness | 0,9 - 1,9 mm |
for cut-out size | 9,5x9,5 mm/0,37x0,37" |
Variante | Sheet steel, with grounding pin |
Clip-nuts
Thread | M 6 |
Suitable for sheet metal thickness | 1,5 - 2,0 mm |
for cut-out size | 9,5x9,5 mm/0,37x0,37" |
Variante | Sheet steel, with grounding pin |
Clip-nuts
Thread | M 6 |
Suitable for sheet metal thickness | 1,8 - 2,9 mm |
for cut-out size | 9,5x9,5 mm/0,37x0,37" |
Variante | Sheet steel, with grounding pin |
Clip-nuts
Thread | M 6 |
Suitable for sheet metal thickness | 1,7 - 2,7 mm |
for cut-out size | 9,5x9,5 mm/0,37x0,37" |
Variante | Sheet steel, without grounding pin |
Clip-nuts
Thread | M 6 |
Suitable for sheet metal thickness | 1,7 - 2,7 mm |
for cut-out size | 9,5x9,5 mm/0,37x0,37" |
Variante | Stainless steel, without grounding pin |
Clip-nuts
Thread | M 6 |
Suitable for sheet metal thickness | 1,8 - 3,2 mm |
for cut-out size | 12,3x12,3 mm/0,48x0,48" |
Variante | Stainless steel, without grounding pin |
Clip-nuts
Thread | M 6 |
Suitable for sheet metal thickness | 2,8 - 3,5 mm |
for cut-out size | 9,5x9,5 mm/0,37x0,37" |
Variante | Sheet steel, without grounding pin |
Clip-nuts
Thread | M 6 |
Suitable for sheet metal thickness | 2,8 - 3,5 mm |
for cut-out size | 9,5x9,5 mm/0,37x0,37" |
Variante | Stainless steel, without grounding pin |
Clip-nuts
Thread | M 6 |
Suitable for sheet metal thickness | 2,8 - 3,5 mm |
for cut-out size | 9,5x9,5 mm/0,37x0,37" |
Variante | Sheet steel, with grounding pin |
Hold up
Door opening limiter for H390/H395, H370/H375
Surface | Galvanized |
Material | Sheet steel |
suitable for type | H390/H395 and H370/H375 from door width 500 mm |
Door opening limiter for H390/H395, H370/H375
Surface | Galvanized |
Material | Sheet steel |
suitable for type | H390/H395 and H370/H375 from door less than 500 mm |