Bar lock long
Key Features
- Redirection of rotary movement of a closure in a lengthwise movement
Product Description
For the realisation of a 2- or 3-point-locking
For the connection of flat bars
Mountable with or without latch
Also for the installation within a sealing area of enclosures
By turning over applicable on the right or left
Difference of versions: chose the version „for hooking in“ – see fig. a1 – if you can use a flat bar that matches in length. The flat bar already provides the corresponding recess. Chose the version „for clipping on“ – see fig. a – if you have to adjust the flat bar in length. Then you drill a hole with a diameter of 6.1 mm on the flat bar.
Technical Data
- Order No.: 8101-208-9002
- Version: For clipping on
- Material: zinc die-casting
- Surface: untreated
- Material and Surface: rods: steel galvanized; pinion: zinc diecasting; grounding spring: stainless steel 1.4310
- Length of stroke: 24 mm/0,94"
Notice
- Actuation of bar lock mostly by „turning lever closure squared installation opening for flat bars“ or by „key plate“. The assembly and the function of the key plate is similar to the assembly of a turning lock and has to be demanded separately.
- With the „adapter for latches“ standard latches can be added.
- At häwa: installation in 2-leaf cabinets
Scope of Delivery
- 1 lock with grounding spring and a fixing screw for actuation
Accessories
Accessories locking systems
Latch without stop lug
Material | Sheet steel |
Surface | Galvanized |
type | with push rod connection |
Latch without stop lug
Material | Sheet steel |
Surface | Galvanized |
type | with push rod connection |
Latch without stop lug
Material | Sheet steel |
Surface | Galvanized |
type | with push rod connection |