Die Holder ø 40 mm for Quick-Press 300
Die Holder ø 40 mm for Quick-Press 300
For holding punching tool dies in bow punch Quick-Press 300
The die holder in the bow punch is aligned via a ø 13 mm clamping pin
The dies are fixed at the external diameter via a threaded pin
The die holder can either be inserted at the bottom of the bow punch or at the top of the hydraulic cylinde

Art No.
Product range
Diameter dimensions
Max. sheet metal thickness
Draw stud
Remember
For workshop equipment
ø 13 mm/0,51"
die with 40 mm external diameter

Die Holder ø 50 mm for Quick-Press 300
Die Holder ø 50 mm for Quick-Press 300
For holding punching tool dies in bow punch Quick-Press 300
The die holder in the bow punch is aligned via a ø 13 mm clamping pin
The dies are fixed at the external diameter via a threaded pin
The die holder can either be inserted at the bottom of the bow punch or at the top of the hydraulic cylinder
The die holder size determines which punching tools can be used

Art No.
Product range
Diameter dimensions
Max. sheet metal thickness
Draw stud
Remember
For workshop equipment
ø 13 mm/0,51"
die with 50 mm external diameter

Adapter for Quick-Press 300
Adapter for Quick-Press 300
For holding round punches from ø 20.4 mm in bow punch Quick-Press 300
The adapter in the bow punch is aligned via a ø 13 mm clamping pin
Adapter with M14x1.5 thread to hold the punch
The adapter can either be inserted at the bottom of the bow punch or at the top of the hydraulic cylinder
With spring-loaded center pin for easy workpiece positioning

Art No.
Product range
Diameter dimensions
Max. sheet metal thickness
Draw stud
Remember
For workshop equipment
ø 13 mm/0,51"
M14x1,5

Length and Depth Stop for Quick-Press 300
Length and Depth Stop for Quick-Press 300
Stop, guided on slide bearings made of aluminum profiles for attachment to Quick-Press 300
Including two continuously adjustable tilt stops with clamping lever
With deeply lasered scaling on a stainless steel strip

Art No.
Product range
Diameter dimensions
Max. sheet metal thickness
Draw stud
Remember
For workshop equipment
Adjustable from 5 to 300 mm; 0.2" to 11.81"

Positioning Stop for Quick-Press 300
Positioning Stop for Quick-Press 300
For punching hole rows with the Quick-Press 300
Precise adjustment of the hole distance through backlash-free threaded spindle and position indicato

Art No.
Product range
Diameter dimensions
Max. sheet metal thickness
Draw stud
Remember
For workshop equipment
Adjustable backlash-free through scale 30 – 100 mm; 1.18“ – 3.94“

Tilt Stop for Quick-Press 300
Tilt Stop for Quick-Press 300
Tilt stops can be mounted at the right and left side of the cylinder at a minimum distance of 40 mm / 1.57“.
Option: left and right version

Remember
For workshop equipment
left side of the cylinder
For workshop equipment
right side of the cylinder

Pedestal for Quick-Press 300
Pedestal for Quick-Press 300
For Quick-Press 300 installation
The pedestal is existing of a 300 x 400 mm / 11.81 x 15.75“ base plate with drillings for the attachment on the floor
The working height of the installed Quick-Press 300 is 1050 mm / 41.34“

Art No.
Product range
Diameter dimensions
Max. sheet metal thickness
Draw stud
Remember
For workshop equipment
850 mm

Hydraulic Cylinder for Quick-Press 300
Hydraulic Cylinder for Quick-Press 300
Hydraulic cylinder for hydraulically operated bow punch Quick-Press 300.
Equipped with a quick release coupling for connection to häwa hydraulic pumps.
Our product does work with other manufacturers pumps.
Punch adapter with 13 mm diameter clamping pin.

Art No.
Product range
Diameter dimensions
Max. sheet metal thickness
Draw stud
Remember
For workshop equipment
ø 13 mm/0,51"

Contact for products
Find your personal point of contact
We are happy to help you.

The best switch cabinets and casings are not produced on an assembly line, but rather designed in close cooperation with our customers. Are you ready to begin? Then contact your personal häwa consultant.

Choose your advisor now

PM-Leitung: Herr Eglof. PM-Leitung: Herr Eglof.