2662-0700-02-00
Length and Depth Stop for Quick-Press 300
- Permanently readable scale
Product description
Stop, guided on slide bearings made of aluminum profiles for attachment to Quick-Press 300
Including two continuously adjustable tilt stops with clamping lever
With deeply lasered scaling on a stainless steel strip
Technical data
-
Article number: 2662-0700-02-00
-
Product family: For workshop equipment
-
PRODUKTGRUPPENNAMEEBENE4: Accessories Punching Tools
-
PRODUKTGRUPPENNAMEEBENE5: Accessories for Bow Punches
-
PRODUKTGRUPPENNAMEEBENE6: Accessories Quick-Press 300
-
Depth stop: Adjustable from 5 to 300 mm; 0.2" to 11.81"
-
Setting range: Adjustable from 38 to 500 mm; 1.5" to 19.69" on both sides of the cylinder
Notice
- It is possible to use several tilt stops simultaneously.
- We recommend to use our repositioning stop to produce economic series punching (For the mentioned individual parts, see “Accessories” and “Spare Parts”).
2662-0701-01-00
Tilt Stop for Quick-Press 300
Product range
For workshop equipment
Type
left side of the cylinder
2662-0701-02-00
Tilt Stop for Quick-Press 300
Product range
For workshop equipment
Type
right side of the cylinder
2662-7203-00-01
Manually Operated Hydraulic Quick-Press 300
Suitable for
round punches up to ø 40.5 mm; 1,59" / square punches up to 25.4 mm; 1" / rectangular punches up to 36 mm; 1.42" diagonal
Material thickness
Sheet steel to 2 mm; 14 ga / Stainless steel to 1,5 mm; 16 ga / Aluminum to 3 mm; 9 ga
Processing depth
300 mm
Punch holder Ø
13 mm
2662-7205-00-01
Hydraulic Quick-Press 300
Suitable for
round punches up to ø 40.5 mm; 1,59" / square punches up to 25.4 mm; 1" / rectangular punches up to 36 mm; 1.42" diagonal
Max. sheet metal thickness
Sheet steel to 2 mm; 14 ga / Stainless steel to 1,5 mm; 16 ga / Aluminum to 3 mm; 9 ga
Processing depth
300 mm
Punch holder (diameter)
13 mm
2662-7206-00-01
Hydraulic Quick-Press 300 with center point indicator
Suitable for
round punches up to ø 40.5 mm; 1,59" / square punches up to 25.4 mm; 1" / rectangular punches up to 36 mm; 1.42" diagonal
Max. sheet metal thickness
Sheet steel to 2 mm; 14 ga / Stainless steel to 1,5 mm; 16 ga / Aluminum to 3 mm; 9 ga
Processing depth
300 mm
Punch holder (diameter)
13 mm
2662-7203-00-01
Manually Operated Hydraulic Quick-Press 300
Suitable for
round punches up to ø 40.5 mm; 1,59" / square punches up to 25.4 mm; 1" / rectangular punches up to 36 mm; 1.42" diagonal
Material thickness
Sheet steel to 2 mm; 14 ga / Stainless steel to 1,5 mm; 16 ga / Aluminum to 3 mm; 9 ga
Processing depth
300 mm
Punch holder Ø
13 mm
2662-7205-00-01
Hydraulic Quick-Press 300
Suitable for
round punches up to ø 40.5 mm; 1,59" / square punches up to 25.4 mm; 1" / rectangular punches up to 36 mm; 1.42" diagonal
Max. sheet metal thickness
Sheet steel to 2 mm; 14 ga / Stainless steel to 1,5 mm; 16 ga / Aluminum to 3 mm; 9 ga
Processing depth
300 mm
Punch holder (diameter)
13 mm
2662-7206-00-01
Hydraulic Quick-Press 300 with center point indicator
Suitable for
round punches up to ø 40.5 mm; 1,59" / square punches up to 25.4 mm; 1" / rectangular punches up to 36 mm; 1.42" diagonal
Max. sheet metal thickness
Sheet steel to 2 mm; 14 ga / Stainless steel to 1,5 mm; 16 ga / Aluminum to 3 mm; 9 ga
Processing depth
300 mm
Punch holder (diameter)
13 mm
2662-0701-01-00
Tilt Stop for Quick-Press 300
Product range
For workshop equipment
Type
left side of the cylinder
2662-0701-02-00
Tilt Stop for Quick-Press 300
Product range
For workshop equipment
Type
right side of the cylinder
Contact for products
Find your personal point of contact
We are happy to help you.
The best switch cabinets and casings are not produced on an assembly line, but rather designed in close cooperation with our customers. Are you ready to begin? Then contact your personal häwa consultant.