Round Punches with clamping pin, with 40 mm External Die Diameter
Round Punches with clamping pin, with 40 mm External Die Diameter
For use in bow punches.
Low tool wear through optimum cutting geometry
With spring-loaded center pin for easy workpiece positioning
Quick, precise and burr-free punching

Remember
For workshop equipment
6.6 mm
Sheet steel 2 mm; 14 ga / Stainless steel 1,5 mm; 16 ga / Aluminium 3 mm; 9 ga
40 mm
For workshop equipment
9 mm
Sheet steel 2 mm; 14 ga / Stainless steel 1,5 mm; 16 ga / Aluminium 3 mm; 9 ga
40 mm
For workshop equipment
12.2 mm
Sheet steel 2 mm; 14 ga / Stainless steel 1,5 mm; 16 ga / Aluminium 3 mm; 9 ga
40 mm
For workshop equipment
12.7 mm
Sheet steel 2 mm; 14 ga / Stainless steel 1,5 mm; 16 ga / Aluminium 3 mm; 9 ga
40 mm
For workshop equipment
15.2 mm
Sheet steel 2 mm; 14 ga / Stainless steel 1,5 mm; 16 ga / Aluminium 3 mm; 9 ga
40 mm
For workshop equipment
16.2 mm
Sheet steel 2 mm; 14 ga / Stainless steel 1,5 mm; 16 ga / Aluminium 3 mm; 9 ga
40 mm
For workshop equipment
18.6 mm
Sheet steel 2 mm; 14 ga / Stainless steel 1,5 mm; 16 ga / Aluminium 3 mm; 9 ga
40 mm

Round Punches with clamping pin, with 50 mm External Die Diameter
Round Punches with clamping pin, with 50 mm External Die Diameter
Low tool wear through optimum cutting geometry
With spring-loaded center pin for easy workpiece positioning
Quick, precise and burr-free punching

Remember
For workshop equipment
5 mm
Sheet steel 2 mm; 14 ga / Stainless steel 1,5 mm; 16 ga / Aluminium 3 mm; 9 ga
50 mm
For workshop equipment
6.6 mm
Sheet steel 2 mm; 14 ga / Stainless steel 1,5 mm; 16 ga / Aluminium 3 mm; 9 ga
50 mm
For workshop equipment
9 mm
Sheet steel 2 mm; 14 ga / Stainless steel 1,5 mm; 16 ga / Aluminium 3 mm; 9 ga
50 mm
For workshop equipment
10.5 mm
Sheet steel 2 mm; 14 ga / Stainless steel 1,5 mm; 16 ga / Aluminium 3 mm; 9 ga
50 mm
For workshop equipment
12.2 mm
Sheet steel 2 mm; 14 ga / Stainless steel 1,5 mm; 16 ga / Aluminium 3 mm; 9 ga
50 mm
For workshop equipment
12.7 mm
Sheet steel 2 mm; 14 ga / Stainless steel 1,5 mm; 16 ga / Aluminium 3 mm; 9 ga
50 mm
For workshop equipment
15.2 mm
Sheet steel 2 mm; 14 ga / Stainless steel 1,5 mm; 16 ga / Aluminium 3 mm; 9 ga
50 mm
For workshop equipment
16.2 mm
Sheet steel 2 mm; 14 ga / Stainless steel 1,5 mm; 16 ga / Aluminium 3 mm; 9 ga
50 mm
For workshop equipment
18.6 mm
Sheet steel 2 mm; 14 ga / Stainless steel 1,5 mm; 16 ga / Aluminium 3 mm; 9 ga
50 mm

Round Punches with 40 mm External Die Diameter
Round Punches with 40 mm External Die Diameter
For the use in bow punches
Low tool wear through optimum cutting geometry
Quick, precise and burr-free punching

Remember
For workshop equipment
For Quick-Press 300
20.2 mm
Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 3,5 mm; 9 ga - see note
40 mm
For workshop equipment
For Quick-Press 300
20.4 mm
Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 3,5 mm; 9 ga - see note
40 mm
For workshop equipment
For Quick-Press 300
22.5 mm
Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 3,5 mm; 9 ga - see note
40 mm

Round Punches with 50 mm External Die Diameter
Round Punches with 50 mm External Die Diameter
For the use in bow punches
Low tool wear through optimum cutting geometry
Quick, precise and burr-free punching

Remember
For workshop equipment
20.2 mm
Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 3,5 mm; 9 ga - see note
50 mm
For workshop equipment
20.4 mm
Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 3,5 mm; 9 ga - see note
50 mm
For workshop equipment
21.3 mm
Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 3,5 mm; 9 ga - see note
50 mm
For workshop equipment
22.5 mm
Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 3,5 mm; 9 ga - see note
50 mm
For workshop equipment
24.5 mm
Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 3,5 mm; 9 ga - see note
50 mm
For workshop equipment
25.2 mm
Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 3,5 mm; 9 ga - see note
50 mm
For workshop equipment
28.5 mm
Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 3,5 mm; 9 ga - see note
50 mm
For workshop equipment
30.5 mm
Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 3,5 mm; 9 ga - see note
50 mm
For workshop equipment
32.2 mm
Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 3,5 mm; 9 ga - see note
For workshop equipment
37 mm
Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 3,5 mm; 9 ga - see note
50 mm

Round Punches with 72 mm External Die Diameter
Round Punches with 72 mm External Die Diameter
For the use in bow punches
Low tool wear through optimum cutting geometry
Quick, precise and burr-free punching.

Remember
For workshop equipment
For Maxi-Press 500
40.2 mm
Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 3,5 mm; 9 ga - see note
72 mm
For workshop equipment
For Maxi-Press 500
45.5 mm
Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 3,5 mm; 9 ga - see note
72 mm
For workshop equipment
For Maxi-Press 500
47 mm
Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 3,5 mm; 9 ga - see note
72 mm
For workshop equipment
For Maxi-Press 500
50.2 mm
Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 3,5 mm; 9 ga - see note
72 mm
For workshop equipment
For Maxi-Press 500
53.9 mm
Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 3,5 mm; 9 ga - see note
72 mm
For workshop equipment
For Maxi-Press 500
60 mm
Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 3,5 mm; 9 ga - see note
72 mm
For workshop equipment
For Maxi-Press 500
63.2 mm
Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 3,5 mm; 9 ga - see note
72 mm

Round Punch with Stepped Die
Round Punch with Stepped Die
For the use in bow punches
Low tool wear through optimum cutting geometry
Quick, precise and burr-free punching

Remember
For workshop equipment
40.2 mm
Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 3,5 mm; 9 ga - see note
50 mm, step die
For workshop equipment
50.2 mm
Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 3,5 mm; 9 ga - see note
50 mm, step die
For workshop equipment
63.2 mm
Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 3,5 mm; 9 ga - see note
50 mm, step die

Round Punch Rubber Wipers for Bow Punches
Round Punch Rubber Wipers for Bow Punches
Easy wiping of the workpiece from the punch
The different punch diameters require suitable rubber wipers
From die diameter 14.1 mm, wiper is supplied with sheet steel retaining washe

Remember
For workshop equipment
6.6 mm
For workshop equipment
9 mm
For workshop equipment
10.5 mm
For workshop equipment
12.2 mm
For workshop equipment
12.7 mm
For workshop equipment
15.2 mm
For workshop equipment
16.2 mm
For workshop equipment
16.3 mm
For workshop equipment
18.6 mm
For workshop equipment
20.2 mm
For workshop equipment
20.4 mm
For workshop equipment
For workshop equipment
22.5 mm
For workshop equipment
24.5 mm
For workshop equipment
25.2 mm
For workshop equipment
25.4 mm
For workshop equipment
28.5 mm
For workshop equipment
32.2 mm
For workshop equipment
30.5 mm
For workshop equipment
32.5 mm
For workshop equipment
37 mm
For workshop equipment
40.2 mm
For workshop equipment
50.2 mm

Contact for products
Find your personal point of contact
We are happy to help you.

The best switch cabinets and casings are not produced on an assembly line, but rather designed in close cooperation with our customers. Are you ready to begin? Then contact your personal häwa consultant.

Choose your advisor now