2661-0922-52-01
Round Punch with Two Keyways for Quick-Press 300
- Long lifetime
- Maximum productivity with minimum effort
- For punching grooves for components with anti-rotation protection
- Tool can be rotated by 90°
Product description
For the use in bow punches Quick-Press 300
For punching 2 opposing keyways WxH 3.3x2.5 mm
For sheet steel and stainless steel sheets
Quick, precise and burr-free punching
Technical Data
-
Order No.: 2661-0922-52-01
-
Max. sheet metal thickness: Sheet steel 2 mm; 14 ga / Stainless steel 1,5 mm; 16 ga / Aluminium 3 mm; 9 ga
-
PRODUKTFAMILIE: For workshop equipment
-
Clamping pin: ø 13 mm/0,51"
-
Diameter of the die holder: 1,97 inch
-
Size: ø 22,5 mm
Notice
- Remove the center pin during laser operation.
- When ordering this punch, please check if you already have the matching die support (2680-0350-00-00) in stock.
- 1 punch, consisting of punch and die
2680-0350-00-00
Die Holder for Quick-Press 300
Product range
For workshop equipment
Type
for dies with 50 mm external diameter
Clamping pin
ø 13 mm/0,51"
2662-7203-00-01
Manually Operated Hydraulic Quick-Press 300
Application
Punching of cut-outs
Suitable for
round punches up to ø 40.5 mm; 1,59" / square punches up to 25.4 mm; 1" / rectangular punches up to 36 mm; 1.42" diagonal
Material thickness
Sheet steel to 2 mm; 14 ga / Stainless steel to 1,5 mm; 16 ga / Aluminum to 3 mm; 9 ga
Punch holder
ø 13 mm/0,51"
Processing depth
300 mm
2662-7205-00-01
Hydraulic Quick-Press 300
Application
Punching of cut-outs
Suitable for
round punches up to ø 40.5 mm; 1,59" / square punches up to 25.4 mm; 1" / rectangular punches up to 36 mm; 1.42" diagonal
Material thickness
Sheet steel to 2 mm; 14 ga / Stainless steel to 1,5 mm; 16 ga / Aluminum to 3 mm; 9 ga
Punch holder
ø 13 mm/0,51"
Processing depth
300 mm
2662-7206-00-01
Hydraulic Quick-Press 300 with center point indicator
Application
Punching of cut-outs
Suitable for
round punches up to ø 40.5 mm; 1,59" / square punches up to 25.4 mm; 1" / rectangular punches up to 36 mm; 1.42" diagonal
Material thickness
Sheet steel to 2 mm; 14 ga / Stainless steel to 1,5 mm; 16 ga / Aluminum to 3 mm; 9 ga
Punch holder
ø 13 mm/0,51"
Processing depth
300 mm
Contact for products
Find your personal point of contact
We are happy to help you.
The best switch cabinets and casings are not produced on an assembly line, but rather designed in close cooperation with our customers. Are you ready to begin? Then contact your personal häwa consultant.
