Die Holder ø 50 mm for Maxi-Press 500
Die Holder ø 50 mm for Maxi-Press 500
For holding punching tool dies in bow punch Maxi-Press 500
The die holder in the bow punch is aligned via the fixed ø 72 mm die holder
The dies are fixed at the external diameter via a threaded pin

Art No.
Product range
Diameter dimensions
Max. sheet metal thickness
Draw stud
Remember
For workshop equipment
50 mm
72 mm

Adapter for Maxi-Press 500
Adapter for Maxi-Press 500
For holding round punches from ø 20.4 mm in bow punch Maxi-Press 500
The adapter in the bow punch is aligned via a ø 20 mm clamping pin
Clamping pin with one recess
Adapter with M14x1.5 thread to hold the punch
The adapter is mounted in the hydraulic cylinder
With spring-loaded center pin for easy workpiece positioning

Art No.
Product range
Diameter dimensions
Max. sheet metal thickness
Draw stud
Remember
For workshop equipment
ø 20 mm/0,79"
M14x1,5

Length and Depth Stop for Maxi-Press 500
Length and Depth Stop for Maxi-Press 500
Angle profile, guided on slide bearings without measuring scale for attachment to Maxi-Press 500, is used as depth stop and workpiece support
Including two continuously adjustable (length) stop blocks with clamping lever
In order to be able to punch up to 30 mm / 1.18“, the angle profile can be also adjusted to height
The depth clamping of the stop is effected via a hand lever that can be reached easily from the front

Art No.
Remember
For workshop equipment
Adjustable up to 600 mm on both sides of the cylinder

Tilt Stop for Maxi-Press 500
Tilt Stop for Maxi-Press 500
Tilt stops can be mounted at a minimum spacing of 30 mm / 1.18“ at the left and right side of the cylinde

Art No.
Remember
For workshop equipment

Hydraulic Cylinder for Maxi-Press 500
Hydraulic Cylinder for Maxi-Press 500
Hydraulic cylinder for bow punch Maxi-Press 500.
Equipped with a quick release coupling for connection to häwa hydraulic pumps.
Our product does work with other manufacturers pumps.
Punch adapter with 20 mm diameter clamping pin.

Art No.
Product range
Diameter dimensions
Max. sheet metal thickness
Draw stud
Remember
For workshop equipment
ø 20 mm; 0.79“

Contact for products
Find your personal point of contact
We are happy to help you.

The best switch cabinets and casings are not produced on an assembly line, but rather designed in close cooperation with our customers. Are you ready to begin? Then contact your personal häwa consultant.

Choose your advisor now

PM-Leitung: Herr Eglof. PM-Leitung: Herr Eglof.