Round Punch Threaded for Ø 19 mm (3/4”) Draw Studs
Add to wish list
Already on the wish list
Key Features
- Long lifetime
- Maximum productivity with minimum effort
- For sheet steel or aluminum sheets
Product Description
For punching with "mobile devices".
Low tool wear through optimum cutting geometry.
Easy removal of the deformed waste piece.
Quick, precise and burr-free punching.
Technical Data
- Order No.: 2623-0828-30-00
- Product range: for mobile devices
- Max. sheet metal thickness: Steel 2 mm; 14 ga / Stainless steel 1,5 mm; 16 ga
- Diameter dimensions: 28.3 mm
- Draw stud: ø 19 mm / 3/4"
- PG: 21
- Pilot hole Ø: 20 mm
Notice
- You need a häwa punching pump or a häwa hydraulic cylinder. If this hole tool is compatible with your häwa punching unit, please refer to the "Tool hint - Hole punch for mobile devices" under "Downloads".
- The max. sheet metal thickness to be punched is also dependent on the punching device
Scope of Delivery
- 1 round punch, consisting of punch and die
Accessories
Accessories Mobile Devices
Accessories for Processing Sheet Metals
Suitable for
2611-7600-01-00
Hydraulic Cylinder Power 19
| Product range | for mobile devices |
| Suitable for | Round punches up to ø 135 mm; 5.31“ / square punches 103 mm; 4.06“ / rectangular punches up to a diagonal size of 145 mm; 5.71“ |
| Max. sheet metal thickness | Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 4 mm; 6 ga |
| Screw receptacle | 19 mm (3/4”) draw studs |
2611-7600-02-00
Hydraulic Cylinder Power 25
| Product range | for mobile devices |
| Suitable for | Round punches up to ø 185 mm; 7.28“ / square punches 140 mm; 5.51“ / rectangular punches up to a diagonal size of 195 mm; 7.68“ |
| Max. sheet metal thickness | Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 4 mm; 6 ga |
| Screw receptacle | Thread M25 x 1,5 |
2621-7100-02-01
Powerman Kompact
| Type | with metric round punch kit |
| Suitable for | round punches up to ø 60 mm / square punches up to 46 mm / rectangular punches up to 65 mm diagonal |
| Max. sheet metal thickness | Sheet steel 2 mm; 14 ga / Stainless steel 1,5 mm; 19 ga / Aluminum 3 mm; 9 ga |
| Punching force | 50 kN |
2621-7100-05-00
Powerman Kompact
| Suitable for | round punches up to ø 60 mm / square punches up to 46 mm / rectangular punches up to 65 mm diagonal |
| Max. sheet metal thickness | Sheet steel 2 mm; 14 ga / Stainless steel 1,5 mm; 19 ga / Aluminum 3 mm; 9 ga |
| Punching force | 50 kN |
2621-7600-01-00
Hydraulic Cylinder 9.5 mm (3/8“)
| Product range | for mobile devices |
| Suitable for | round punches up to ø 60 mm / square punches up to 46 mm / rectangular punches up to 65 mm diagonal |
| Max. sheet metal thickness | Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 4 mm; 6 ga |
| Screw receptacle | 9.5 mm (3/8”) draw stud |
2622-7200-02-00
Powerman Junior
| Type | without round punches |
| Suitable for | round punches up to ø 50.5 mm / square punches up to 25.4 mm / rectangular punches up to 37.5 mm diagonal |
| Max. sheet metal thickness | Sheet steel 2 mm; 14 ga / Stainless steel 1,5 mm; 19 ga / Aluminum 3 mm; 9 ga |
| Punching force | 40 kN |
2622-7204-02-01
Powerman Junior
| Type | with metric round punch kit |
| Suitable for | round punches up to ø 50.5 mm / square punches up to 25.4 mm / rectangular punches up to 37.5 mm diagonal |
| Max. sheet metal thickness | Sheet steel 2 mm; 14 ga / Stainless steel 1,5 mm; 19 ga / Aluminum 3 mm; 9 ga |
| Punching force | 40 kN |
2626-7200-01-00
Powerman Vario
| Type | without round punches in sheet metal case |
| Suitable for | round punches up to ø 80 mm / square punches up to 60 mm / rectangular punches up to 85 mm diagonal |
| Max. sheet metal thickness | Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 4 mm; 6 ga |
| Punching force | 50 kN |
2626-7206-01-00
Powerman Vario
| Type | PG1 with round punches from PG9 to PG21 in plastic case |
| Suitable for | round punches up to ø 80 mm / square punches up to 60 mm / rectangular punches up to 85 mm diagonal |
| Max. sheet metal thickness | Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 4 mm; 6 ga |
| Punching force | 50 kN |
2626-7206-02-00
Powerman Vario
| Type | PG2 with round punches from PG9 to PG29 in plastic case |
| Suitable for | round punches up to ø 80 mm / square punches up to 60 mm / rectangular punches up to 85 mm diagonal |
| Max. sheet metal thickness | Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 4 mm; 6 ga |
| Punching force | 50 kN |
2626-7207-01-01
Powerman Vario
| Type | with metric round punches from M12 to M50 in plastic case |
| Suitable for | round punches up to ø 80 mm / square punches up to 60 mm / rectangular punches up to 85 mm diagonal |
| Max. sheet metal thickness | Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 4 mm; 6 ga |
| Punching force | 50 kN |
2629-7200-00-00
Powerlec Vario
| Type | without round punches |
| Suitable for | round punches up to ø 80 mm / square punches up to 68 mm / rectangular punches up to 96 mm diagonal |
| Max. sheet metal thickness | Sheet steel 2,5 mm; 12 ga / Stainless steel 2 mm; 14 ga / Aluminum 4 mm; 6 ga |
| Punching force | 60 kN |
2629-7200-01-01
Powerlec Vario
| Type | with metric round punch kit |
| Suitable for | round punches up to ø 80 mm / square punches up to 68 mm / rectangular punches up to 96 mm diagonal |
| Max. sheet metal thickness | Sheet steel 2,5 mm; 12 ga / Stainless steel 2 mm; 14 ga / Aluminum 4 mm; 6 ga |
| Punching force | 60 kN |
2683-0719-75-00
Draw Stud for Manual Operation
| Type | without ball bearing |
| Size | 19 x 75 mm |
| Wrench Size | 25 mm |
2683-1719-75-00
Draw Stud for Manual Operation
| Type | with ball bearing |
| Size | 19 x 75 mm |
| Wrench Size | 25 mm |
2684-7100-01-01
Powerman
| Suitable for | round punches up to ø 120 mm / square punches 92 mm / rectangular punches up to 138 mm diagonal |
| Max. sheet metal thickness | Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 4 mm; 6 ga |
| Punching force | 65 kN |
2684-7600-01-00
Hydraulic Cylinder 19 (3/4”)
| Product range | for mobile devices |
| Suitable for | round punches up to ø 120 mm / square punches 92 mm / rectangular punches up to 138 mm diagonal |
| Max. sheet metal thickness | Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 4 mm; 6 ga |
| Screw receptacle | 19 mm (3/4”) draw studs |
2685-7200-01-01
Powerman Step hydraulic pump
| Suitable for | round punches up to ø 120 mm / square punches 92 mm / rectangular punches up to 138 mm diagonal |
| Max. sheet metal thickness | Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 4 mm; 6 ga |
| Punching force | 65 kN |
