High Performance Cutting Oil
Add to wish list
Already on the wish list
Key Features
Product Description
In plastic bottle with nozzle
Reduces power force
Increases lifetime
Skin-friendly odorless
Technical Data
- Order No.: 2684-0700-25-00
- Filling capacity: 0.25 liters
Notice
- Can also be used for thread lubrication of draw studs for manual operation.
Scope of Delivery
- 1 plastic bottle with nozzle
Suitable for
2605-7700-08-50
Punching Tool for AlCu-Press
| Product range | For workshop equipment |
| Size ø | 8.5 mm / 0.33 inch |
2605-7750-10-50
Punching tool AlCu-Press ø 10.5 mm for laminated copper
| Product range | For workshop equipment |
2621-0711-10-00
Draw Studs for Round Punches
| Product range | for mobile devices |
| Draw stud | 11,1/9,5 mm; 7/16"/3/8" |
| Screw length | 95 mm / 3.74 inch |
2621-7100-02-01
Powerman Kompact
| Type | with metric round punch kit |
| Suitable for | round punches up to ø 60 mm / square punches up to 46 mm / rectangular punches up to 65 mm diagonal |
| Max. sheet metal thickness | Sheet steel 2 mm; 14 ga / Stainless steel 1,5 mm; 19 ga / Aluminum 3 mm; 9 ga |
| Punching force | 50 kN |
2621-7100-05-00
Powerman Kompact
| Suitable for | round punches up to ø 60 mm / square punches up to 46 mm / rectangular punches up to 65 mm diagonal |
| Max. sheet metal thickness | Sheet steel 2 mm; 14 ga / Stainless steel 1,5 mm; 19 ga / Aluminum 3 mm; 9 ga |
| Punching force | 50 kN |
2622-0719-02-00
Draw Studs for Round Punches
| Product range | for mobile devices |
| Draw stud | 19/9,5 mm; 3/4"/3/8" |
| Screw length | 130 mm / 5.12 inch |
2622-7200-02-00
Powerman Junior
| Type | without round punches |
| Suitable for | round punches up to ø 50.5 mm / square punches up to 25.4 mm / rectangular punches up to 37.5 mm diagonal |
| Max. sheet metal thickness | Sheet steel 2 mm; 14 ga / Stainless steel 1,5 mm; 19 ga / Aluminum 3 mm; 9 ga |
| Punching force | 40 kN |
2622-7204-02-01
Powerman Junior
| Type | with metric round punch kit |
| Suitable for | round punches up to ø 50.5 mm / square punches up to 25.4 mm / rectangular punches up to 37.5 mm diagonal |
| Max. sheet metal thickness | Sheet steel 2 mm; 14 ga / Stainless steel 1,5 mm; 19 ga / Aluminum 3 mm; 9 ga |
| Punching force | 40 kN |
2623-0706-30-00
Draw Studs for Round Punches
| Product range | for mobile devices |
| Draw stud | 6,3/9,5 mm; 1/4"/3/8" |
| Screw length | 82 mm / 3.23 inch |
2623-0710-00-00
Draw Studs for Round Punches
| Product range | for mobile devices |
| Draw stud | 9,5/9,5 mm; 3/8"/3/8" |
| Screw length | 100 mm / 3.94 inch |
2623-0719-00-00
Draw Studs for Round Punches
| Product range | for mobile devices |
| Draw stud | 19/9,5 mm; 3/4"/3/8" |
| Screw length | 130 mm / 5.12 inch |
2623-0810-20-00
Round Punch Threaded for Ø 19 mm (3/4”) Draw Studs
| Product range | for mobile devices |
| Diameter dimensions | 102 mm / 4.02 inch |
| Max. sheet metal thickness | Steel 2 mm; 14 ga / Stainless steel 1 mm; 20 ga |
| Draw stud | ø 19 mm / 3/4" |
2623-0811-43-00
Round Punch Threaded for Ø 19 mm (3/4”) Draw Studs
| Product range | for mobile devices |
| Diameter dimensions | 114.3 mm / 4.50 inch |
| Max. sheet metal thickness | Steel 2 mm; 14 ga / Stainless steel 1 mm; 20 ga |
| Draw stud | ø 19 mm / 3/4" |
2623-0812-01-00
Round Punch Threaded for Ø 19 mm (3/4”) Draw Studs
| Product range | for mobile devices |
| Diameter dimensions | 120 mm / 4.72 inch |
| Max. sheet metal thickness | Steel 2 mm; 14 ga / Stainless steel 1 mm; 20 ga |
| Draw stud | ø 19 mm / 3/4" |
2623-0812-20-00
Round Punch Threaded for Ø 9.5 mm (3/8”) Draw Studs
| Product range | for mobile devices |
| Diameter dimensions | 12.2 mm / 0.48 inch |
| Max. sheet metal thickness | Steel 1,5 mm; 16 ga |
| Draw stud | ø 9,5 mm / 3/8" |
2623-0812-70-00
Round Punch Threaded for Ø 9.5 mm (3/8”) Draw Studs
| Product range | for mobile devices |
| Diameter dimensions | 12.7 mm / 0.50 inch |
| Max. sheet metal thickness | Steel 1,5 mm; 16 ga |
| Draw stud | ø 9,5 mm / 3/8" |
2623-0814-00-00
Round Punch Threaded for Ø 9.5 mm (3/8”) Draw Studs
| Product range | for mobile devices |
| Diameter dimensions | 14 mm / 0.55 inch |
| Max. sheet metal thickness | Steel 1,5 mm; 16 ga / Stainless steel 1 mm; 20 ga |
| Draw stud | ø 9,5 mm / 3/8" |
2623-0815-20-00
Round Punch Threaded for Ø 9.5 mm (3/8”) Draw Studs
| Product range | for mobile devices |
| Diameter dimensions | 15.2 mm / 0.60 inch |
| Max. sheet metal thickness | Steel 1,5 mm; 16 ga / Stainless steel 1 mm; 20 ga |
| Draw stud | ø 9,5 mm / 3/8" |
2623-0816-20-00
Round Punch Threaded for Ø 9.5 mm (3/8”) Draw Studs
| Product range | for mobile devices |
| Diameter dimensions | 16.2 mm / 0.64 inch |
| Max. sheet metal thickness | Steel 2 mm; 14 ga / Stainless steel 1,5 mm; 16 ga |
| Draw stud | ø 9,5 mm / 3/8" |
2623-0817-30-00
Round Punch Threaded for Ø 9.5 mm (3/8”) Draw Studs
| Product range | for mobile devices |
| Diameter dimensions | 17.3 mm / 0.68 inch |
| Max. sheet metal thickness | Steel 2 mm; 14 ga / Stainless steel 1,5 mm; 16 ga |
| Draw stud | ø 9,5 mm / 3/8" |
2623-0818-60-00
Round Punch Threaded for Ø 9.5 mm (3/8”) Draw Studs
| Product range | for mobile devices |
| Diameter dimensions | 18.6 mm / 0.73 inch |
| Max. sheet metal thickness | Steel 2 mm; 14 ga / Stainless steel 1,5 mm; 16 ga |
| Draw stud | ø 9,5 mm / 3/8" |
2623-0819-00-00
Round Punch Threaded for Ø 9.5 mm (3/8”) Draw Studs
| Product range | for mobile devices |
| Diameter dimensions | 19 mm / 0.75 inch |
| Max. sheet metal thickness | Steel 2 mm; 14 ga / Stainless steel 1,5 mm; 16 ga |
| Draw stud | ø 9,5 mm / 3/8" |
2623-0820-20-00
Round Punch Threaded for Ø 9.5 mm (3/8”) Draw Studs
| Product range | for mobile devices |
| Diameter dimensions | 20.2 mm / 0.80 inch |
| Max. sheet metal thickness | Steel 2 mm; 14 ga / Stainless steel 2 mm; 14 ga |
| Draw stud | ø 9,5 mm / 3/8" |
2623-0820-40-00
Round Punch Threaded for Ø 9.5 mm (3/8”) Draw Studs
| Product range | for mobile devices |
| Diameter dimensions | 20.4 mm / 0.80 inch |
| Max. sheet metal thickness | Steel 2 mm; 14 ga / Stainless steel 2 mm; 14 ga |
| Draw stud | ø 9,5 mm / 3/8" |
2623-0821-30-00
Round Punch Threaded for Ø 9.5 mm (3/8”) Draw Studs
| Product range | for mobile devices |
| Diameter dimensions | 21.3 mm / 0.84 inch |
| Max. sheet metal thickness | Steel 2 mm; 14 ga / Stainless steel 2 mm; 14 ga |
| Draw stud | ø 9,5 mm / 3/8" |
2623-0822-50-00
Round Punch Threaded for Ø 9.5 mm (3/8”) Draw Studs
| Product range | for mobile devices |
| Diameter dimensions | 22.5 mm / 0.89 inch |
| Max. sheet metal thickness | Steel 2 mm; 14 ga / Stainless steel 2 mm; 14 ga |
| Draw stud | ø 9,5 mm / 3/8" |
2623-0823-80-00
Round Punch Threaded for Ø 9.5 mm (3/8”) Draw Studs
| Product range | for mobile devices |
| Diameter dimensions | 23.8 mm / 0.94 inch |
| Max. sheet metal thickness | Steel 2 mm; 14 ga / Stainless steel 2 mm; 14 ga |
| Draw stud | ø 9,5 mm / 3/8" |
2623-0824-50-00
Round Punch Threaded for Ø 9.5 mm (3/8”) Draw Studs
| Product range | for mobile devices |
| Diameter dimensions | 24.5 mm / 0.96 inch |
| Max. sheet metal thickness | Steel 2 mm; 14 ga / Stainless steel 2 mm; 14 ga |
| Draw stud | ø 9,5 mm / 3/8" |
2623-0825-20-00
Round Punch Threaded for Ø 9.5 mm (3/8”) Draw Studs
| Product range | for mobile devices |
| Diameter dimensions | 25.2 mm / 0.99 inch |
| Max. sheet metal thickness | Steel 2 mm; 14 ga / Stainless steel 2 mm; 14 ga |
| Draw stud | ø 9,5 mm / 3/8" |
2623-0827-00-00
Round Punch Threaded for Ø 9.5 mm (3/8”) Draw Studs
| Product range | for mobile devices |
| Diameter dimensions | 27 mm / 1.06 inch |
| Max. sheet metal thickness | Steel 2 mm; 14 ga / Stainless steel 1,5 mm; 16 ga |
| Draw stud | ø 9,5 mm / 3/8" |
2623-0828-30-00
Round Punch Threaded for Ø 19 mm (3/4”) Draw Studs
| Product range | for mobile devices |
| Diameter dimensions | 28.3 mm / 1.11 inch |
| Max. sheet metal thickness | Steel 2 mm; 14 ga / Stainless steel 1,5 mm; 16 ga |
| Draw stud | ø 19 mm / 3/4" |
2623-0828-50-00
Round Punch Threaded for Ø 9.5 mm (3/8”) Draw Studs
| Product range | for mobile devices |
| Diameter dimensions | 28.5 mm / 1.12 inch |
| Max. sheet metal thickness | Steel 2 mm; 14 ga / Stainless steel 1,5 mm; 16 ga |
| Draw stud | ø 9,5 mm / 3/8" |
2623-0830-50-00
Round Punch Threaded for Ø 19 mm (3/4”) Draw Studs
| Product range | for mobile devices |
| Diameter dimensions | 30.5 mm / 1.20 inch |
| Max. sheet metal thickness | Steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga |
| Draw stud | ø 19 mm / 3/4" |
2623-0830-51-00
Round Punch Threaded for Ø 9.5 mm (3/8”) Draw Studs
| Product range | for mobile devices |
| Diameter dimensions | 30.5 mm / 1.20 inch |
| Max. sheet metal thickness | Steel 2 mm; 14 ga / Stainless steel 1,5 mm; 16 ga |
| Draw stud | ø 9,5 mm / 3/8" |
2623-0832-20-00
Round Punch Threaded for Ø 19 mm (3/4”) Draw Studs
| Product range | for mobile devices |
| Diameter dimensions | 32.2 mm / 1.27 inch |
| Max. sheet metal thickness | Steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga |
| Draw stud | ø 19 mm / 3/4" |
2623-0832-21-00
Round Punch Threaded for Ø 9.5 mm (3/8”) Draw Studs
| Product range | for mobile devices |
| Diameter dimensions | 32.2 mm / 1.27 inch |
| Max. sheet metal thickness | Steel 2 mm; 14 ga / Stainless steel 1,5 mm; 16 ga |
| Draw stud | ø 9,5 mm / 3/8" |
2623-0833-30-00
Round Punch Threaded for Ø 9.5 mm (3/8”) Draw Studs
| Product range | for mobile devices |
| Diameter dimensions | 33.3 mm / 1.31 inch |
| Max. sheet metal thickness | Steel 2 mm; 14 ga / Stainless steel 1,5 mm; 16 ga |
| Draw stud | ø 9,5 mm / 3/8" |
2623-0834-10-00
Round Punch Threaded for Ø 19 mm (3/4”) Draw Studs
| Product range | for mobile devices |
| Diameter dimensions | 34.1 mm / 1.34 inch |
| Max. sheet metal thickness | Steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga |
| Draw stud | ø 19 mm / 3/4" |
2623-0835-00-00
Round Punch Threaded for Ø 19 mm (3/4”) Draw Studs
| Product range | for mobile devices |
| Diameter dimensions | 35 mm / 1.38 inch |
| Max. sheet metal thickness | Steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga |
| Draw stud | ø 19 mm / 3/4" |
2623-0835-01-00
Round Punch Threaded for Ø 9.5 mm (3/8”) Draw Studs
| Product range | for mobile devices |
| Diameter dimensions | 35 mm / 1.38 inch |
| Max. sheet metal thickness | Steel 2 mm; 14 ga / Stainless steel 1,5 mm; 16 ga |
| Draw stud | ø 9,5 mm / 3/8" |
2623-0837-00-00
Round Punch Threaded for Ø 19 mm (3/4”) Draw Studs
| Product range | for mobile devices |
| Diameter dimensions | 37 mm / 1.46 inch |
| Max. sheet metal thickness | Steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga |
| Draw stud | ø 19 mm / 3/4" |
2623-0838-00-00
Round Punch Threaded for Ø 19 mm (3/4”) Draw Studs
| Product range | for mobile devices |
| Diameter dimensions | 38 mm / 1.50 inch |
| Max. sheet metal thickness | Steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga |
| Draw stud | ø 19 mm / 3/4" |
2623-0838-11-00
Round Punch Threaded for Ø 9.5 mm (3/8”) Draw Studs
| Product range | for mobile devices |
| Diameter dimensions | 38.1 mm / 1.50 inch |
| Max. sheet metal thickness | Steel 2 mm; 14 ga / Stainless steel 1,5 mm; 16 ga |
| Draw stud | ø 9,5 mm / 3/8" |
2623-0840-20-00
Round Punch Threaded for Ø 19 mm (3/4”) Draw Studs
| Product range | for mobile devices |
| Diameter dimensions | 40.2 mm / 1.58 inch |
| Max. sheet metal thickness | Steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga |
| Draw stud | ø 19 mm / 3/4" |
2623-0841-20-00
Round Punch Threaded for Ø 19 mm (3/4”) Draw Studs
| Product range | for mobile devices |
| Diameter dimensions | 41.2 mm / 1.62 inch |
| Max. sheet metal thickness | Steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga |
| Draw stud | ø 19 mm / 3/4" |
2623-0843-30-00
Round Punch Threaded for Ø 19 mm (3/4”) Draw Studs
| Product range | for mobile devices |
| Diameter dimensions | 43.3 mm / 1.70 inch |
| Max. sheet metal thickness | Steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga |
| Draw stud | ø 19 mm / 3/4" |
2623-0845-50-00
Round Punch Threaded for Ø 19 mm (3/4”) Draw Studs
| Product range | for mobile devices |
| Diameter dimensions | 45.5 mm / 1.79 inch |
| Max. sheet metal thickness | Steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga |
| Draw stud | ø 19 mm / 3/4" |
2623-0847-00-00
Round Punch Threaded for Ø 19 mm (3/4”) Draw Studs
| Product range | for mobile devices |
| Diameter dimensions | 47 mm / 1.85 inch |
| Max. sheet metal thickness | Steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga |
| Draw stud | ø 19 mm / 3/4" |
2623-0850-20-00
Round Punch Threaded for Ø 19 mm (3/4”) Draw Studs
| Product range | for mobile devices |
| Diameter dimensions | 50.2 mm / 1.98 inch |
| Max. sheet metal thickness | Steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga |
| Draw stud | ø 19 mm / 3/4" |
2623-0854-00-00
Round Punch Threaded for Ø 19 mm (3/4”) Draw Studs
| Product range | for mobile devices |
| Diameter dimensions | 54 mm / 2.13 inch |
| Max. sheet metal thickness | Steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga |
| Draw stud | ø 19 mm / 3/4" |
2623-0856-50-00
Round Punch Threaded for Ø 19 mm (3/4”) Draw Studs
| Product range | for mobile devices |
| Diameter dimensions | 56.5 mm / 2.22 inch |
| Max. sheet metal thickness | Steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga |
| Draw stud | ø 19 mm / 3/4" |
2623-0860-00-00
Round Punch Threaded for Ø 19 mm (3/4”) Draw Studs
| Product range | for mobile devices |
| Diameter dimensions | 60 mm / 2.36 inch |
| Max. sheet metal thickness | Steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga |
| Draw stud | ø 19 mm / 3/4" |
2623-0863-20-00
Round Punch Threaded for Ø 19 mm (3/4”) Draw Studs
| Product range | for mobile devices |
| Diameter dimensions | 63.2 mm / 2.49 inch |
| Max. sheet metal thickness | Steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga |
| Draw stud | ø 19 mm / 3/4" |
2623-0864-40-00
Round Punch Threaded for Ø 19 mm (3/4”) Draw Studs
| Product range | for mobile devices |
| Diameter dimensions | 64.4 mm / 2.54 inch |
| Max. sheet metal thickness | Steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga |
| Draw stud | ø 19 mm / 3/4" |
2623-0866-60-00
Round Punch Threaded for Ø 19 mm (3/4”) Draw Studs
| Product range | for mobile devices |
| Diameter dimensions | 66.6 mm / 2.62 inch |
| Max. sheet metal thickness | Steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga |
| Draw stud | ø 19 mm / 3/4" |
2623-0870-00-00
Round Punch Threaded for Ø 19 mm (3/4”) Draw Studs
| Product range | for mobile devices |
| Diameter dimensions | 70 mm / 2.76 inch |
| Max. sheet metal thickness | Steel 2 mm; 14 ga / Stainless steel 1,5 mm; 16 ga |
| Draw stud | ø 19 mm / 3/4" |
2623-0875-20-00
Round Punch Threaded for Ø 19 mm (3/4”) Draw Studs
| Product range | for mobile devices |
| Diameter dimensions | 75.2 mm / 2.96 inch |
| Max. sheet metal thickness | Steel 2 mm; 14 ga / Stainless steel 1,5 mm; 16 ga |
| Draw stud | ø 19 mm / 3/4" |
2623-0876-20-00
Round Punch Threaded for Ø 19 mm (3/4”) Draw Studs
| Product range | for mobile devices |
| Diameter dimensions | 76.2 mm / 3.00 inch |
| Max. sheet metal thickness | Steel 2 mm; 14 ga / Stainless steel 1,5 mm; 16 ga |
| Draw stud | ø 19 mm / 3/4" |
2623-0880-00-00
Round Punch Threaded for Ø 19 mm (3/4”) Draw Studs
| Product range | for mobile devices |
| Diameter dimensions | 80 mm / 3.15 inch |
| Max. sheet metal thickness | Steel 2 mm; 14 ga / Stainless steel 1,5 mm; 16 ga |
| Draw stud | ø 19 mm / 3/4" |
2623-0882-00-00
Round Punch Threaded for Ø 19 mm (3/4”) Draw Studs
| Product range | for mobile devices |
| Diameter dimensions | 82 mm / 3.23 inch |
| Max. sheet metal thickness | Steel 2 mm; 14 ga / Stainless steel 1,5 mm; 16 ga |
| Draw stud | ø 19 mm / 3/4" |
2623-0888-50-00
Round Punch Threaded for Ø 19 mm (3/4”) Draw Studs
| Product range | for mobile devices |
| Diameter dimensions | 88.5 mm / 3.48 inch |
| Max. sheet metal thickness | Steel 2 mm; 14 ga / Stainless steel 1,5 mm; 16 ga |
| Draw stud | ø 19 mm / 3/4" |
2623-0892-00-00
Round Punch Threaded for Ø 19 mm (3/4”) Draw Studs
| Product range | for mobile devices |
| Diameter dimensions | 92 mm / 3.62 inch |
| Max. sheet metal thickness | Steel 2 mm; 14 ga / Stainless steel 1 mm; 20 ga |
| Draw stud | ø 19 mm / 3/4" |
2623-0915-80-00
Square Punch 15.8 mm / 0.62”
| Product range | for mobile devices |
| Size | 15,8 x 15,8 mm / 0,62 x 0,62" |
| Max. sheet metal thickness | Steel 2 mm; 14 ga |
| Draw stud | ø 9,5 mm / 3/8" |
2623-0922-20-00
Square Punch 22.2 mm / 0.87”
| Product range | for mobile devices |
| Size | 22,2 x 22,2 mm; 0,87 x 0,87" |
| Max. sheet metal thickness | Steel 2 mm; 14 ga |
| Draw stud | ø 9,5 mm / 3/8" |
2623-0922-52-01
Round 2 Keyway Punch
| Product range | for mobile devices |
| Diameter dimensions | 22.5 mm / 0.89 inch |
| Max. sheet metal thickness | Steel 2 mm; 14 ga / Stainless steel 1,5 mm; 16 ga |
| Draw stud | ø 9,5 mm / 3/8" |
2623-0925-40-00
Square punch 25.4
| Product range | for mobile devices |
| Size | 25,4 x 25,4 mm; 1 x 1" |
| Max. sheet metal thickness | Steel 2 mm; 14 ga |
| Draw stud | ø 9,5 mm / 3/8" |
2623-0946-00-00
Square Punch 46 mm/9.5 (3/8”)
| Product range | for mobile devices |
| Size | 46 x 46 mm; 1.81 x 1.81" |
| Max. sheet metal thickness | Steel 2 mm; 14 ga |
| Draw stud | ø 9,5 mm / 3/8" |
2623-7812-30-00
Round Punch Kit, from PG7 to PG21 + ø 30.5 mm
| Product range | for mobile devices |
| Type | without draw studs |
| Draw stud | ø 9,5 mm / 3/8" |
2623-7812-50-00
Round Punch Kit, Metric from M12 to M50
| Product range | for mobile devices |
| Type | without draw studs |
| Draw stud | ø 9,5 mm; 3/8" / ø 19 mm; 3/4" |
2623-7812-60-00
Round Punch Kit from PG7 to PG48 + ø 30.5 mm
| Product range | for mobile devices |
| Type | without draw studs |
| Draw stud | ø 9,5 mm; 3/8" / ø 19 mm; 3/4" |
2624-0710-00-00
Draw Studs for Round Punches
| Product range | for mobile devices |
| Draw stud | 9,5/9,5 mm; 3/8"/3/8" |
| Screw length | 87 mm / 3.43 inch |
2624-0711-19-00
Draw Studs for Round Punches
| Product range | for mobile devices |
| Draw stud | 11,1/19 mm; 7/16"/3/4" |
| Screw length | 100 mm / 3.94 inch |
2624-0719-00-00
Draw Studs for Round Punches
| Product range | for mobile devices |
| Draw stud | 19/19 mm; 3/4"/3/4" |
| Screw length | 120 mm / 4.72 inch |
2626-7200-01-00
Powerman Vario
| Type | without round punches in sheet metal case |
| Suitable for | round punches up to ø 80 mm / square punches up to 60 mm / rectangular punches up to 85 mm diagonal |
| Max. sheet metal thickness | Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 4 mm; 6 ga |
| Punching force | 50 kN |
2626-7206-01-00
Powerman Vario
| Type | PG1 with round punches from PG9 to PG21 in plastic case |
| Suitable for | round punches up to ø 80 mm / square punches up to 60 mm / rectangular punches up to 85 mm diagonal |
| Max. sheet metal thickness | Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 4 mm; 6 ga |
| Punching force | 50 kN |
2626-7206-02-00
Powerman Vario
| Type | PG2 with round punches from PG9 to PG29 in plastic case |
| Suitable for | round punches up to ø 80 mm / square punches up to 60 mm / rectangular punches up to 85 mm diagonal |
| Max. sheet metal thickness | Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 4 mm; 6 ga |
| Punching force | 50 kN |
2626-7207-01-01
Powerman Vario
| Type | with metric round punches from M12 to M50 in plastic case |
| Suitable for | round punches up to ø 80 mm / square punches up to 60 mm / rectangular punches up to 85 mm diagonal |
| Max. sheet metal thickness | Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 4 mm; 6 ga |
| Punching force | 50 kN |
2629-7200-00-00
Powerlec Vario
| Type | without round punches |
| Suitable for | round punches up to ø 80 mm / square punches up to 68 mm / rectangular punches up to 96 mm diagonal |
| Max. sheet metal thickness | Sheet steel 2,5 mm; 12 ga / Stainless steel 2 mm; 14 ga / Aluminum 4 mm; 6 ga |
| Punching force | 60 kN |
2629-7200-01-01
Powerlec Vario
| Type | with metric round punch kit |
| Suitable for | round punches up to ø 80 mm / square punches up to 68 mm / rectangular punches up to 96 mm diagonal |
| Max. sheet metal thickness | Sheet steel 2,5 mm; 12 ga / Stainless steel 2 mm; 14 ga / Aluminum 4 mm; 6 ga |
| Punching force | 60 kN |
2642-0422-20-00
Square Punch for Maxi-Press 500
| Product range | For workshop equipment |
| Size | 22,2 x 22,2 mm; 0,87 x 0,87" |
| Max. sheet metal thicknesse | Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 4 mm; 6 ga |
| Die - external diameter | 50 mm / 1.97 inch |
2642-0425-40-00
Square Punch for Maxi-Press 500
| Product range | For workshop equipment |
| Size | 25,4 x 25,4 mm; 1 x 1" |
| Max. sheet metal thicknesse | Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 4 mm; 6 ga |
| Die - external diameter | 50 mm / 1.97 inch |
2642-0922-30-00
Rectangular Punch for Maxi-Press 500
| Product range | For workshop equipment |
| Size ø | 22 x 30 mm; 0.87 x 1.18" |
| Max. sheet metal thickness | Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 4 mm; 6 ga |
| Die - external diameter | 50 mm / 1.97 inch |
2643-0240-20-00
Round Punches with 72 mm External Die Diameter
| Product range | For workshop equipment |
| Type | For Maxi-Press 500 |
| Diameter dimensions | 40.2 mm / 1.58 inch |
| Max. sheet metal thickness | Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 3,5 mm; 9 ga - see note |
| Die - external diameter | 72 mm / 2.83 inch |
2643-0245-50-00
Round Punches with 72 mm External Die Diameter
| Product range | For workshop equipment |
| Type | For Maxi-Press 500 |
| Diameter dimensions | 45.5 mm / 1.79 inch |
| Max. sheet metal thickness | Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 3,5 mm; 9 ga - see note |
| Die - external diameter | 72 mm / 2.83 inch |
2643-0247-00-00
Round Punches with 72 mm External Die Diameter
| Product range | For workshop equipment |
| Type | For Maxi-Press 500 |
| Diameter dimensions | 47 mm / 1.85 inch |
| Max. sheet metal thickness | Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 3,5 mm; 9 ga - see note |
| Die - external diameter | 72 mm / 2.83 inch |
2643-0250-20-00
Round Punches with 72 mm External Die Diameter
| Product range | For workshop equipment |
| Type | For Maxi-Press 500 |
| Diameter dimensions | 50.2 mm / 1.98 inch |
| Max. sheet metal thickness | Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 3,5 mm; 9 ga - see note |
| Die - external diameter | 72 mm / 2.83 inch |
2643-0253-90-00
Round Punches with 72 mm External Die Diameter
| Product range | For workshop equipment |
| Type | For Maxi-Press 500 |
| Diameter dimensions | 53.9 mm / 2.12 inch |
| Max. sheet metal thickness | Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 3,5 mm; 9 ga - see note |
| Die - external diameter | 72 mm / 2.83 inch |
2643-0260-00-00
Round Punches with 72 mm External Die Diameter
| Product range | For workshop equipment |
| Type | For Maxi-Press 500 |
| Diameter dimensions | 60 mm / 2.36 inch |
| Max. sheet metal thickness | Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 3,5 mm; 9 ga - see note |
| Die - external diameter | 72 mm / 2.83 inch |
2643-0263-20-00
Round Punches with 72 mm External Die Diameter
| Product range | For workshop equipment |
| Type | For Maxi-Press 500 |
| Diameter dimensions | 63.2 mm / 2.49 inch |
| Max. sheet metal thickness | Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 3,5 mm; 9 ga - see note |
| Die - external diameter | 72 mm / 2.83 inch |
2643-0922-52-00
Round Punch with Two Keyways for Maxi-Press 500
| Product range | For workshop equipment |
| Diameter dimensions | 22.5 mm / 0.89 inch |
| Max. sheet metal thickness | Steel 2 mm; 14ga / Stainless steel 1,5 mm; 16ga / Aluminum 3 mm; 9 ga |
| Die - external diameter | 50 mm / 1.97 inch |
2643-0946-00-00
Square Punch for Maxi-Press 500
| Product range | For workshop equipment |
| Size | 46 x 46 mm; 1.81 x 1.81" |
| Max. sheet metal thicknesse | Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 4 mm; 6 ga |
2661-0205-00-00
Round Punches with clamping pin, with 50 mm External Die Diameter
| Product range | For workshop equipment |
| Diameter dimensions | 5 mm / 0.20 inch |
| Max. sheet metal thickness | Sheet steel 2 mm; 14 ga / Stainless steel 1,5 mm; 19 ga / Aluminum 3 mm; 9 ga |
| Die - external diameter | 50 mm / 1.97 inch |
2661-0206-06-00
Round Punches with clamping pin, with 50 mm External Die Diameter
| Product range | For workshop equipment |
| Diameter dimensions | 6.6 mm / 0.26 inch |
| Max. sheet metal thickness | Sheet steel 2 mm; 14 ga / Stainless steel 1,5 mm; 19 ga / Aluminum 3 mm; 9 ga |
| Die - external diameter | 50 mm / 1.97 inch |
2661-0209-00-00
Round Punches with clamping pin, with 50 mm External Die Diameter
| Product range | For workshop equipment |
| Diameter dimensions | 9 mm / 0.35 inch |
| Max. sheet metal thickness | Sheet steel 2 mm; 14 ga / Stainless steel 1,5 mm; 19 ga / Aluminum 3 mm; 9 ga |
| Die - external diameter | 50 mm / 1.97 inch |
2661-0210-50-00
Round Punches with clamping pin, with 50 mm External Die Diameter
| Product range | For workshop equipment |
| Diameter dimensions | 10.5 mm / 0.41 inch |
| Max. sheet metal thickness | Sheet steel 2 mm; 14 ga / Stainless steel 1,5 mm; 19 ga / Aluminum 3 mm; 9 ga |
| Die - external diameter | 50 mm / 1.97 inch |
2661-0212-20-00
Round Punches with clamping pin, with 50 mm External Die Diameter
| Product range | For workshop equipment |
| Diameter dimensions | 12.2 mm / 0.48 inch |
| Max. sheet metal thickness | Sheet steel 2 mm; 14 ga / Stainless steel 1,5 mm; 19 ga / Aluminum 3 mm; 9 ga |
| Die - external diameter | 50 mm / 1.97 inch |
2661-0212-70-00
Round Punches with clamping pin, with 50 mm External Die Diameter
| Product range | For workshop equipment |
| Diameter dimensions | 12.7 mm / 0.50 inch |
| Max. sheet metal thickness | Sheet steel 2 mm; 14 ga / Stainless steel 1,5 mm; 19 ga / Aluminum 3 mm; 9 ga |
| Die - external diameter | 50 mm / 1.97 inch |
2661-0215-20-00
Round Punches with clamping pin, with 50 mm External Die Diameter
| Product range | For workshop equipment |
| Diameter dimensions | 15.2 mm / 0.60 inch |
| Max. sheet metal thickness | Sheet steel 2 mm; 14 ga / Stainless steel 1,5 mm; 19 ga / Aluminum 3 mm; 9 ga |
| Die - external diameter | 50 mm / 1.97 inch |
2661-0216-20-00
Round Punches with clamping pin, with 50 mm External Die Diameter
| Product range | For workshop equipment |
| Diameter dimensions | 16.2 mm / 0.64 inch |
| Max. sheet metal thickness | Sheet steel 2 mm; 14 ga / Stainless steel 1,5 mm; 19 ga / Aluminum 3 mm; 9 ga |
| Die - external diameter | 50 mm / 1.97 inch |
2661-0218-60-00
Round Punches with clamping pin, with 50 mm External Die Diameter
| Product range | For workshop equipment |
| Diameter dimensions | 18.6 mm / 0.73 inch |
| Max. sheet metal thickness | Sheet steel 2 mm; 14 ga / Stainless steel 1,5 mm; 19 ga / Aluminum 3 mm; 9 ga |
| Die - external diameter | 50 mm / 1.97 inch |
2661-0220-20-00
Round Punches with 50 mm External Die Diameter
| Product range | For workshop equipment |
| Diameter dimensions | 20.2 mm / 0.80 inch |
| Max. sheet metal thickness | Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 3,5 mm; 9 ga - see note |
| Die - external diameter | 50 mm / 1.97 inch |
2661-0220-40-00
Round Punches with 50 mm External Die Diameter
| Product range | For workshop equipment |
| Diameter dimensions | 20.4 mm / 0.80 inch |
| Max. sheet metal thickness | Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 3,5 mm; 9 ga - see note |
| Die - external diameter | 50 mm / 1.97 inch |
2661-0221-30-00
Round Punches with 50 mm External Die Diameter
| Product range | For workshop equipment |
| Diameter dimensions | 21.3 mm / 0.84 inch |
| Max. sheet metal thickness | Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 3,5 mm; 9 ga - see note |
| Die - external diameter | 50 mm / 1.97 inch |
2661-0222-50-00
Round Punches with 50 mm External Die Diameter
| Product range | For workshop equipment |
| Diameter dimensions | 22.5 mm / 0.89 inch |
| Max. sheet metal thickness | Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 3,5 mm; 9 ga - see note |
| Die - external diameter | 50 mm / 1.97 inch |
2661-0224-50-00
Round Punches with 50 mm External Die Diameter
| Product range | For workshop equipment |
| Diameter dimensions | 24.5 mm / 0.96 inch |
| Max. sheet metal thickness | Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 3,5 mm; 9 ga - see note |
| Die - external diameter | 50 mm / 1.97 inch |
2661-0225-20-00
Round Punches with 50 mm External Die Diameter
| Product range | For workshop equipment |
| Diameter dimensions | 25.2 mm / 0.99 inch |
| Max. sheet metal thickness | Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 3,5 mm; 9 ga - see note |
| Die - external diameter | 50 mm / 1.97 inch |
2661-0228-50-00
Round Punches with 50 mm External Die Diameter
| Product range | For workshop equipment |
| Diameter dimensions | 28.5 mm / 1.12 inch |
| Max. sheet metal thickness | Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 3,5 mm; 9 ga - see note |
| Die - external diameter | 50 mm / 1.97 inch |
2661-0230-50-00
Round Punches with 50 mm External Die Diameter
| Product range | For workshop equipment |
| Diameter dimensions | 30.5 mm / 1.20 inch |
| Max. sheet metal thickness | Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 3,5 mm; 9 ga - see note |
| Die - external diameter | 50 mm / 1.97 inch |
2661-0232-20-00
Round Punches with 50 mm External Die Diameter
| Product range | For workshop equipment |
| Diameter dimensions | 32.2 mm / 1.27 inch |
| Max. sheet metal thickness | Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 3,5 mm; 9 ga - see note |
2661-0237-00-00
Round Punches with 50 mm External Die Diameter
| Product range | For workshop equipment |
| Diameter dimensions | 37 mm / 1.46 inch |
| Max. sheet metal thickness | Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 3,5 mm; 9 ga - see note |
| Die - external diameter | 50 mm / 1.97 inch |
2661-0422-20-00
Square Punch for Quick-Press 300
| Product range | For workshop equipment |
| Size ø | 22,2 x 22,2 mm; 0,87 x 0,87" |
| Max. sheet metal thickness | Sheet steel 2 mm; 14 ga / Stainless steel 1,5 mm; 19 ga / Aluminum 3 mm; 9 ga |
| Die - external diameter | 50 mm / 1.97 inch |
2661-0425-40-00
Square Punch for Quick-Press 300
| Product range | For workshop equipment |
| Size ø | 25,4 x 25,4 mm; 1 x 1" |
| Max. sheet metal thickness | Sheet steel 2 mm; 14 ga / Stainless steel 1,5 mm; 19 ga / Aluminum 3 mm; 9 ga |
| Die - external diameter | 50 mm / 1.97 inch |
2661-0922-52-01
Round Punch with Two Keyways for Quick-Press 300
| Diameter dimensions | 22.5 mm / 0.89 inch |
| Max. sheet metal thickness | Sheet steel 2 mm; 14 ga / Stainless steel 1,5 mm; 19 ga / Aluminum 3 mm; 9 ga |
| Die - external diameter | 50 mm / 1.97 inch |
2665-0422-20-00
Square Punch for Quick-Press 400
| Product range | For workshop equipment |
| Size ø | 22,2 x 22,2 mm; 0,87 x 0,87" |
| Max. sheet metal thickness | Sheet steel 2 mm; 14 ga / Stainless steel 1,5 mm; 19 ga / Aluminum 3 mm; 9 ga |
| Die - external diameter | 50 mm / 1.97 inch |
2665-0425-40-00
Square Punch for Quick-Press 400
| Product range | For workshop equipment |
| Size ø | 25,4 x 25,4 mm; 1 x 1" |
| Max. sheet metal thickness | Sheet steel 2 mm; 14 ga / Stainless steel 1,5 mm; 19 ga / Aluminum 3 mm; 9 ga |
| Die - external diameter | 50 mm / 1.97 inch |
2665-0922-52-01
Round Punch with Two Keyways for Quick-Press 400
| Product range | For workshop equipment |
| Size ø | ø 22.5 with two keyways |
| Max. sheet metal thickness | Sheet steel 2 mm; 14 ga / Stainless steel 1,5 mm; 19 ga / Aluminum 3 mm; 9 ga |
| Die - external diameter | 50 mm / 1.97 inch |
2680-0206-60-00
Round Punch with Clamping Pin for Quick-Press 300
| Product range | For workshop equipment |
| Diameter dimensions | 6.6 mm / 0.26 inch |
| Max. sheet metal thickness | Sheet steel 2 mm; 14 ga / Stainless steel 1,5 mm; 19 ga / Aluminum 3 mm; 9 ga |
| Die - external diameter | 40 mm / 1.57 inch |
2680-0209-00-00
Round Punch with Clamping Pin for Quick-Press 300
| Product range | For workshop equipment |
| Diameter dimensions | 9 mm / 0.35 inch |
| Max. sheet metal thickness | Sheet steel 2 mm; 14 ga / Stainless steel 1,5 mm; 19 ga / Aluminum 3 mm; 9 ga |
| Die - external diameter | 40 mm / 1.57 inch |
2680-0212-20-00
Round Punch with Clamping Pin for Quick-Press 300
| Product range | For workshop equipment |
| Diameter dimensions | 12.2 mm / 0.48 inch |
| Max. sheet metal thickness | Sheet steel 2 mm; 14 ga / Stainless steel 1,5 mm; 19 ga / Aluminum 3 mm; 9 ga |
| Die - external diameter | 40 mm / 1.57 inch |
2680-0212-70-00
Round Punch with Clamping Pin for Quick-Press 300
| Product range | For workshop equipment |
| Diameter dimensions | 12.7 mm / 0.50 inch |
| Max. sheet metal thickness | Sheet steel 2 mm; 14 ga / Stainless steel 1,5 mm; 19 ga / Aluminum 3 mm; 9 ga |
| Die - external diameter | 40 mm / 1.57 inch |
2680-0215-20-00
Round Punch with Clamping Pin for Quick-Press 300
| Product range | For workshop equipment |
| Diameter dimensions | 15.2 mm / 0.60 inch |
| Max. sheet metal thickness | Sheet steel 2 mm; 14 ga / Stainless steel 1,5 mm; 19 ga / Aluminum 3 mm; 9 ga |
| Die - external diameter | 40 mm / 1.57 inch |
2680-0216-20-00
Round Punch with Clamping Pin for Quick-Press 300
| Product range | For workshop equipment |
| Diameter dimensions | 16.2 mm / 0.64 inch |
| Max. sheet metal thickness | Sheet steel 2 mm; 14 ga / Stainless steel 1,5 mm; 19 ga / Aluminum 3 mm; 9 ga |
| Die - external diameter | 40 mm / 1.57 inch |
2680-0218-60-00
Round Punch with Clamping Pin for Quick-Press 300
| Product range | For workshop equipment |
| Diameter dimensions | 18.6 mm / 0.73 inch |
| Max. sheet metal thickness | Sheet steel 2 mm; 14 ga / Stainless steel 1,5 mm; 19 ga / Aluminum 3 mm; 9 ga |
| Die - external diameter | 40 mm / 1.57 inch |
2680-0220-20-00
Round Punches with 40 mm External Die Diameter
| Product range | For workshop equipment |
| Type | For Quick-Press 300 |
| Diameter dimensions | 20.2 mm / 0.80 inch |
| Max. sheet metal thickness | Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 3,5 mm; 9 ga - see note |
| Die - external diameter | 40 mm / 1.57 inch |
2680-0220-40-00
Round Punches with 40 mm External Die Diameter
| Product range | For workshop equipment |
| Type | For Quick-Press 300 |
| Diameter dimensions | 20.4 mm / 0.80 inch |
| Max. sheet metal thickness | Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 3,5 mm; 9 ga - see note |
| Die - external diameter | 40 mm / 1.57 inch |
2680-0222-50-00
Round Punches with 40 mm External Die Diameter
| Product range | For workshop equipment |
| Type | For Quick-Press 300 |
| Diameter dimensions | 22.5 mm / 0.89 inch |
| Max. sheet metal thickness | Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 3,5 mm; 9 ga - see note |
| Die - external diameter | 40 mm / 1.57 inch |
2682-0815-20-25
Round Punch Plus Threaded for ø 9.5 mm (3/8”) Draws Studs
| Product range | for mobile devices |
| Diameter dimensions | 15.2 mm / 0.60 inch |
| Max. sheet metal thickness | Stainless steel 1,5 mm; 16 ga |
| Draw stud | ø 9,5 mm / 3/8" |
2682-0816-20-25
Round Punch Plus Threaded for ø 9.5 mm (3/8”) Draws Studs
| Product range | for mobile devices |
| Diameter dimensions | 16.2 mm / 0.64 inch |
| Max. sheet metal thickness | Stainless steel 2 mm; 14 ga |
| Draw stud | ø 9,5 mm / 3/8" |
2682-0818-60-25
Round Punch Plus Threaded for ø 11.1 mm Draw Studs
| Product range | for mobile devices |
| Diameter dimensions | 18.6 mm / 0.73 inch |
| Max. sheet metal thickness | Stainless steel 2 mm; 14 ga |
| Draw stud | ø 11,1 mm / 7/16" |
2682-0820-20-25
Round Punch Plus Threaded for ø 11.1 mm Draw Studs
| Product range | for mobile devices |
| Diameter dimensions | 20.2 mm / 0.80 inch |
| Max. sheet metal thickness | Stainless steel 2 mm; 14 ga |
| Draw stud | ø 11,1 mm / 7/16" |
2682-0820-40-25
Round Punch Plus Threaded for ø 11.1 mm Draw Studs
| Product range | for mobile devices |
| Diameter dimensions | 20.4 mm / 0.80 inch |
| Max. sheet metal thickness | Stainless steel 2 mm; 14 ga |
| Draw stud | ø 11,1 mm / 7/16" |
2682-0822-50-25
Round Punch Plus Threaded for ø 11.1 mm Draw Studs
| Product range | for mobile devices |
| Diameter dimensions | 22.5 mm / 0.89 inch |
| Max. sheet metal thickness | Stainless steel 2 mm; 14 ga |
| Draw stud | ø 11,1 mm / 7/16" |
2682-0825-20-25
Round Punch Plus Threaded for ø 11.1 mm Draw Studs
| Product range | for mobile devices |
| Diameter dimensions | 25.2 mm / 0.99 inch |
| Max. sheet metal thickness | Stainless steel 2 mm; 14 ga |
| Draw stud | ø 11,1 mm / 7/16" |
2682-0828-50-25
Round Punch Plus Threaded for ø 19 mm (3/4”) Draw Studs
| Product range | for mobile devices |
| Diameter dimensions | 28.5 mm / 1.12 inch |
| Max. sheet metal thickness | Stainless steel 2 mm; 14 ga |
| Draw stud | ø 19 mm / 3/4" |
2682-0830-50-25
Round Punch Plus Threaded for ø 19 mm (3/4”) Draw Studs
| Product range | for mobile devices |
| Diameter dimensions | 30.5 mm / 1.20 inch |
| Max. sheet metal thickness | Stainless steel 2,5 mm; 13 ga |
| Draw stud | ø 19 mm / 3/4" |
2682-0832-20-25
Round Punch Plus Threaded for ø 19 mm (3/4”) Draw Studs
| Product range | for mobile devices |
| Diameter dimensions | 32.2 mm / 1.27 inch |
| Max. sheet metal thickness | Stainless steel 2,5 mm; 13 ga |
| Draw stud | ø 19 mm / 3/4" |
2682-0837-00-25
Round Punch Plus Threaded for ø 19 mm (3/4”) Draw Studs
| Product range | for mobile devices |
| Diameter dimensions | 37 mm / 1.46 inch |
| Max. sheet metal thickness | Stainless steel 2,5 mm; 13 ga |
| Draw stud | ø 19 mm / 3/4" |
2682-0840-20-25
Round Punch Plus Threaded for ø 19 mm (3/4”) Draw Studs
| Product range | for mobile devices |
| Diameter dimensions | 40.2 mm / 1.58 inch |
| Max. sheet metal thickness | Stainless steel 2,5 mm; 13 ga |
| Draw stud | ø 19 mm / 3/4" |
2682-0847-00-25
Round Punch Plus Threaded for ø 19 mm (3/4”) Draw Studs
| Product range | for mobile devices |
| Diameter dimensions | 47 mm / 1.85 inch |
| Max. sheet metal thickness | Stainless steel 2,5 mm; 13 ga |
| Draw stud | ø 19 mm / 3/4" |
2682-0850-20-25
Round Punch Plus Threaded for ø 19 mm (3/4”) Draw Studs
| Product range | for mobile devices |
| Diameter dimensions | 50.2 mm / 1.98 inch |
| Max. sheet metal thickness | Stainless steel 2,5 mm; 13 ga |
| Draw stud | ø 19 mm / 3/4" |
2682-0854-00-25
Round Punch Plus Threaded for ø 19 mm (3/4”) Draw Studs
| Product range | for mobile devices |
| Diameter dimensions | 54 mm / 2.13 inch |
| Max. sheet metal thickness | Stainless steel 2,5 mm; 13 ga |
| Draw stud | ø 19 mm / 3/4" |
2682-0860-00-25
Round Punch Plus Threaded for ø 19 mm (3/4”) Draw Studs
| Product range | for mobile devices |
| Diameter dimensions | 60 mm / 2.36 inch |
| Max. sheet metal thickness | Stainless steel 2,5 mm; 13 ga |
| Draw stud | ø 19 mm / 3/4" |
2682-0863-20-25
Round Punch Plus Threaded for ø 19 mm (3/4”) Draw Studs
| Product range | for mobile devices |
| Diameter dimensions | 63.2 mm / 2.49 inch |
| Max. sheet metal thickness | Stainless steel 2,5 mm; 13 ga |
| Draw stud | ø 19 mm / 3/4" |
2682-7816-50-26
Round Punch Plus Kit, Metric from M16 to M50
| Product range | for mobile devices |
| Size | metric round punch in mm: ø 16.2; ø 20.2; ø 25.2; ø 32.2; ø 40.2; ø 50.2 |
| Max. sheet metal thickness | Stainless steel 2,5 mm; 13 ga |
| Draw stud | ø 9,5 mm; 3/8" / ø 11,1 mm; 7/16" / ø 19 mm; 3/4" |
2683-0000-00-09
Formed punch for MinD D-Sub / IEEE
| Product range | for mobile devices |
| Number of poles | 9 |
| Max. sheet metal thickness | Steel 1,75 mm; 15ga / Stainless steel 1 mm; 20ga / Aluminum 2 mm; 12 ga |
| Draw stud | ø 9,5 mm / 3/8" |
2683-0000-00-25
Formed punch for MinD D-Sub / IEEE
| Product range | for mobile devices |
| Number of poles | 25 |
| Max. sheet metal thickness | Steel 1,75 mm; 15ga / Stainless steel 1 mm; 20ga / Aluminum 2 mm; 12 ga |
| Draw stud | ø 9,5 mm / 3/8" |
2683-0000-00-37
Formed punch for MinD D-Sub / IEEE
| Product range | for mobile devices |
| Number of poles | 37 |
| Max. sheet metal thickness | Steel 1,75 mm; 15ga / Stainless steel 1 mm; 20ga / Aluminum 2 mm; 12 ga |
| Draw stud | ø 9,5 mm / 3/8" |
2683-0000-00-50
Formed punch for MinD D-Sub / IEEE
| Product range | for mobile devices |
| Number of poles | 50 |
| Max. sheet metal thickness | Steel 1,75 mm; 15ga / Stainless steel 1 mm; 20ga / Aluminum 2 mm; 12 ga |
| Draw stud | ø 9,5 mm / 3/8" |
2683-0125-00-02
Square Punch 125 mm / 4.92“
| Product range | for mobile devices |
| Size | 125 x 125 mm; 4.92 x 4.92" |
| Max. sheet metal thickness | Steel 2,5 mm; 12 ga |
| Draw stud | ø 19 mm / 3/4" |
2683-0710-00-00
Draw Studs for Round Punches
| Product range | for mobile devices |
| Draw stud | 9,5/9,5 mm; 3/8"/3/8" |
| Screw length | 72 mm / 2.83 inch |
2683-0710-50-00
Draw Stud for Manual Operation
| Type | without ball bearing |
| Size | 9,5 x 50 mm |
| Wrench Size | 17 mm / 0.67 inch |
2683-0719-00-00
Draw Studs for Round Punches
| Product range | for mobile devices |
| Draw stud | 19/19 mm; 3/4"/3/4" |
| Screw length | 135 mm / 5.31 inch |
2683-0719-75-00
Draw Stud for Manual Operation
| Type | without ball bearing |
| Size | 19 x 75 mm |
| Wrench Size | 25 mm / 0.98 inch |
2683-0725-19-00
Draw Studs for Round Punches
| Product range | for mobile devices |
| Draw stud | 25/19 mm; M25/3/4" |
| Screw length | 120 mm / 4.72 inch |
2683-0920-22-01
Turn Lock Shaped Punch
| Product range | for mobile devices |
| Size | 20,1 x 22,5 mm; 0.79 x 0.89" |
| Max. sheet metal thickness | Sheet steel 2 mm; 14 ga / Stainless steel 1,5 mm; 19 ga / Aluminum 3 mm; 9 ga |
| Draw stud | ø 9,5 mm / 3/8" |
2683-0920-23-01
Turn Lock Shaped Punch
| Product range | for mobile devices |
| Size | 20,2 x 23,1 mm; 0.8 x 0.91 |
| Max. sheet metal thickness | Sheet steel 2 mm; 14 ga / Stainless steel 1,5 mm; 19 ga / Aluminum 3 mm; 9 ga |
| Draw stud | ø 9,5 mm / 3/8" |
2683-0922-31-10
Rectangular Punch 22x30 mm / 0.87x1.18”
| Product range | for mobile devices |
| Size | 22 x 30 mm; 0.87 x 1.18" |
| Max. sheet metal thickness | Steel 1,5 mm; 16 ga |
| Draw stud | ø 9,5 mm / 3/8" |
2683-0922-42-11
Rectangular Punch 22x42 mm / 0.87x1.65”
| Product range | for mobile devices |
| Size | 22 x 42 mm; 0.87 x 1.65" |
| Max. sheet metal thickness | Steel 1,5 mm; 16 ga |
| Draw stud | ø 9,5 mm / 3/8" |
2683-0925-50-00
Rectangular Punch 25x50 mm / 0.98x1.97”
| Product range | for mobile devices |
| Size | 25 x 50 mm; 0.98 x 1.97" |
| Max. sheet metal thickness | Steel 2 mm; 14 ga |
| Draw stud | ø 19 mm / 3/4" |
2683-0936-11-22
Rectangular Punch for Heavy Duty Connectors
| Product range | for mobile devices |
| Size | 36 x 112 mm; 1.42 x 4.41" |
| Max. sheet metal thickness | Steel 3 mm; 11 ga |
| Draw stud | ø 19 mm / 3/4" |
| Number of poles | 24 |
2683-0936-52-02
Rectangular Punch for Heavy Duty Connectors
| Product range | for mobile devices |
| Size | 36 x 52 mm; 1.42 x 2.05" |
| Max. sheet metal thickness | Steel 3 mm; 11 ga |
| Draw stud | ø 19 mm / 3/4" |
| Number of poles | 6 |
2683-0936-65-02
Rectangular Punch for Heavy Duty Connectors
| Product range | for mobile devices |
| Size | 36 x 65 mm; 1.42 x 2.56" |
| Max. sheet metal thickness | Steel 3 mm; 11 ga |
| Draw stud | ø 19 mm / 3/4" |
| Number of poles | 10 |
2683-0936-85-52
Rectangular Punch for Heavy Duty Connectors
| Product range | for mobile devices |
| Size | 36 x 85,5 mm; 1.42 x 3.37" |
| Max. sheet metal thickness | Steel 3 mm; 11 ga |
| Draw stud | ø 19 mm / 3/4" |
| Number of poles | 16 |
2683-0945-00-02
Square Punch 45 mm
| Product range | for mobile devices |
| Size | 45 x 45 mm; 1,77 x 1,77" |
| Max. sheet metal thickness | Steel 3 mm; 11 ga |
| Draw stud | ø 19 mm / 3/4" |
2683-0946-00-02
Square Punch 46 mm / 19 mm (3/4”)
| Product range | for mobile devices |
| Size | 46 x 46 mm; 1.81 x 1.81" |
| Max. sheet metal thickness | Steel 3 mm; 11 ga |
| Draw stud | ø 19 mm / 3/4" |
2683-0946-92-02
Rectangular punch 46x92 mm / 1.81x3.62”
| Product range | for mobile devices |
| Size | 46 x 92 mm; 0.98 x 1.97" |
| Max. sheet metal thickness | Steel 3 mm; 11 ga |
| Draw stud | ø 19 mm / 3/4" |
2683-0968-00-02
Square Punch 68 mm / 2.68“
| Product range | for mobile devices |
| Size | 68 x 68 mm; 2.68 x 2.68" |
| Max. sheet metal thickness | Steel 3 mm; 11 ga |
| Draw stud | ø 19 mm / 3/4" |
2683-0992-00-02
Square Punch 92 mm / 3.62“
| Product range | for mobile devices |
| Size | 92 x 92 mm; 3.62 x 3.62" |
| Max. sheet metal thickness | Steel 3 mm; 11 ga |
| Draw stud | ø 19 mm / 3/4" |
2683-1710-62-00
Draw Stud for Manual Operation
| Type | with ball bearing |
| Size | 9,5 x 62 mm |
| Wrench Size | 17 mm / 0.67 inch |
2683-1719-75-00
Draw Stud for Manual Operation
| Type | with ball bearing |
| Size | 19 x 75 mm |
| Wrench Size | 25 mm / 0.98 inch |
2683-7812-30-20
Round Punch Kit, from PG7 to PG21 + ø 30.5 mm
| Product range | for mobile devices |
| Type | with draw studs |
| Draw stud | ø 9,5 mm / 3/8" |
2683-7812-50-20
Round Punch Kit, Metric from M12 to M50
| Product range | for mobile devices |
| Type | with draw studs |
| Draw stud | ø 9,5 mm; 3/8" / ø 19 mm; 3/4" |
2683-7812-60-30
Round Punch Kit from PG7 to PG48 + ø 30.5 mm
| Product range | for mobile devices |
| Type | with draw studs |
| Draw stud | ø 9,5 mm; 3/8" / ø 19 mm; 3/4" |
2684-0711-19-00
Draw Studs for Round Punches
| Product range | for mobile devices |
| Draw stud | 11,1/19 mm; 7/16"/3/4" |
| Screw length | 112 mm / 4.41 inch |
2684-7100-01-01
Powerman
| Suitable for | round punches up to ø 120 mm / square punches 92 mm / rectangular punches up to 138 mm diagonal |
| Max. sheet metal thickness | Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 4 mm; 6 ga |
| Punching force | 65 kN |
2685-7200-01-01
Powerman Step hydraulic pump
| Suitable for | round punches up to ø 120 mm / square punches 92 mm / rectangular punches up to 138 mm diagonal |
| Max. sheet metal thickness | Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 4 mm; 6 ga |
| Punching force | 65 kN |
