Control enclosure
Key Features
- Control enclosure based on design of series 33
- For mounting to HMA I- pendant arm system
Product Description
Control enclosure based on enclosure design type 33 to accommodate control units
Protective ground connection according to DIN EN 61439-1, M6x16 studs on door and body
The double flanged door frame and narrow door gap avoid the entry of dirt and water while opening the door
Rear door with seamless foamed-in gasket, hinged standard on right side, change to left side possible without drilling
Hidden steel hinges, 180° opening angle
Lock: quarter turn latch lock, locking bolt 3 mm double mandrel
Doors on both sides with reinforcing / perforated profile with attachment holes Ø 4.2 mm every 25 mm
Zateral corner profiles are used as handle strip and optionally hold the front panel
Reinforced roof with suitable cut-out for connection to HMA I- pendant arm system
Technical Data
- Order No.: 7525-5050-20-17
- Protective ground connection: according to DIN EN 61439-1
- Protection type: konstruktiv ausgelegt nach IP54
- Material: Enclosure, door and handle strips: sheet steel, front panel: aluminum
- Lock: plastic housing, locking bolt: GDZn black, latch: galvanized
- Type: Front side with cut-out and front panel
- Dimension: Width: 500 mm
Height: 500 mm
Depth: 200 mm - Weight: 19.5 kg
Scope of Delivery
- Enclosure complete with mounted handle strips and aluminum panel
- 4 x M6x20 screws for connection to HMA I- pendant arm system
Suitable for
Pendant Arm Systems
HMA I- Pendant Arm System
HMA I-080 elbow joint
Position | For connection to enclosures |
Cable passage | 55 x 43 mm/2,17 x 1,69" |
Surface finish | RAL 7016 |