Order No.: 3331-2030-12-06

Wallmount enclosure sheet steel EMC, 1 door

Add to wish list Already on the wish list

Key Features

Protection against electromagnetic interference.
Prevention of unwanted radiation in the environment.
EMC/IP special sealing.
All contact points are conductive.

Wallmount enclosure sheet steel EMC, 1 door

Add to wish list Already on the wish list

Product Description

Wall cabinet with 1 swing door. Optional mounting plate.

Protective ground connection to DIN EN 61439-1. Studs M6x12 to door and body.

Double coated frame and narrow gap prevent entry of dirt and water.

The enclosure's door seals with a special EMC/IP special seal.

Door right and left hingeable, standard stop right

Hinges made of metal, opening angle 180°.

Lock: operation 3 mm double-bit actuation

Door on both sides from 400 mm height with reinforced perforation and mounting holes, positioned 3.6 mm on 25 mm grid, up to 300 mm height, single-sided on hinged side.

Floor from width 400 mm and 200 mm depth with internal cable insertion plates, made of sheet steel.

Mounting plate on the rear panel, with lock bolts M8x35, 10 mm depth adjustable, up to 1000 mm height, mounting plate edged 20 mm, fix positioned

Wall mounting: rear panel locked with screws.

Technical Data

Order No.: 3331-2030-12-06
Type: without mounting plate
Material: Sheet steel
width: 200 mm
height: 300 mm
depth: 125 mm
Sheet thickness: Body: 1,35 mm
Door: 1,35 mm
Maximum installation: depth of 16 or 24 mm with edged mounting panel (20 mm)
Protective ground connection: according to DIN EN 61439-1
Surface finish: Powder coating RAL 7035, texture finish
Lock: GDZn black, latch: galvanized or completely stainless steel
Moungting panel: sendzimir galvanised, 2 mm, from enclosure width/height 600x600 mm 2.5 mm, from a width/height of 801 mm edged 20 mm
Constructed according to: IP54