Enter your search term here
  • full text search
    English
    Order No.: 2623-0828-50-00

    Round Punch Threaded for Ø 9.5 mm (3/8”) Draw Studs

    Key Features

    • Long lifetime
    • Maximum productivity with minimum effort
    • For sheet steel or aluminum sheets

    Product Description

    For punching with "mobile devices".

    Low tool wear through optimum cutting geometry.

    Easy removal of the deformed waste piece.

    Quick, precise and burr-free punching.

    Technical Data

    • Order No.: 2623-0828-50-00
    • Max. sheet metal thickness: Steel 2 mm; 14 ga
      Stainless steel 1,5 mm; 16 ga
    • Product range: for mobile devices
    • Draw stud: ø 9,5 mm / 3/8"
    • Pilot hole Ø: 10.5 mm
    • Diameter dimensions: 28.5 mm
    • PG: 21

    Notice

    • You need a häwa punching pump or a häwa hydraulic cylinder. If this hole tool is compatible with your häwa punching unit, please refer to the "Tool hint - Hole punch for mobile devices" under "Downloads".
    • The max. sheet metal thickness to be punched is also dependent on the punching device.

    Scope of Delivery

    • 1 round punch, consisting of punch and die

    Accessories

    Accessories Punching Tools

    Accessories for sheet metal processing

    High Performance Cutting Oil
    2684-0700-25-00

    High Performance Cutting Oil

    Filling capacity 0.25 liters

    Suitable for

    Accessories

    Accessories Punching Tools

    Accessories for Punching Pumps

    Mobile hydraulic cylinders
    Hydraulic Cylinder Power 19
    2611-7600-01-00

    Hydraulic Cylinder Power 19

    Product range for mobile devices
    Suitable for Round punches up to ø 135 mm; 5.31“ / square punches 103 mm; 4.06“ / rectangular punches up to a diagonal size of 145 mm; 5.71“
    Max. sheet metal thickness Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 4 mm; 6 ga
    Screw receptacle 19 mm (3/4”) draw studs
    Hydraulic Cylinder Power 25
    2611-7600-02-00

    Hydraulic Cylinder Power 25

    Product range for mobile devices
    Suitable for Round punches up to ø 185 mm; 7.28“ / square punches 140 mm; 5.51“ / rectangular punches up to a diagonal size of 195 mm; 7.68“
    Max. sheet metal thickness Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 4 mm; 6 ga
    Screw receptacle Thread M25 x 1,5
    Hydraulic Cylinder 19 (3/4”)
    2684-7600-01-00

    Hydraulic Cylinder 19 (3/4”)

    Product range for mobile devices
    Suitable for round punches up to ø 120 mm; 4.72" / square punches 92 mm; 3.62" / rectangular punches up to 138 mm; 5.43" diagonal
    Max. sheet metal thickness Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 4 mm; 6 ga
    Screw receptacle 19 mm (3/4”) draw studs

    Draw Studs and Nuts

    Draw studs for manual operation
    Draw Stud for Manual Operation
    2683-0710-50-00

    Draw Stud for Manual Operation

    Type without ball bearing
    Size 9,5 x 50 mm
    Draw Stud for Manual Operation
    2683-1710-62-00

    Draw Stud for Manual Operation

    Type with ball bearing
    Size 9,5 x 53 mm/0,37 x 2,09"

    Punching Tools

    Powerman Junior
    2622-7200-02-00

    Powerman Junior

    Type without round punches
    Suitable for round punches up to ø 50.5 mm; 1.99" / square punches up to 25.4 mm; 1" / rectangular punches up to 37.5 mm; 1.48" diagonal
    Max. sheet metal thickness Sheet steel to 2 mm; 14 ga / Stainless steel to 1,5 mm; 16 ga / Aluminum to 3 mm; 9 ga
    Punching force 40 kN
    Powerman Junior
    2622-7204-02-01

    Powerman Junior

    Type with metric round punch kit
    Suitable for round punches up to ø 50.5 mm; 1.99" / square punches up to 25.4 mm; 1" / rectangular punches up to 37.5 mm; 1.48" diagonal
    Max. sheet metal thickness Sheet steel to 2 mm; 14 ga / Stainless steel to 1,5 mm; 16 ga / Aluminum to 3 mm; 9 ga
    Punching force 40 kN
    Powerman Vario
    2626-7200-01-00

    Powerman Vario

    Type without round punches in sheet metal case
    Suitable for round punches up to ø 80 mm; 3.15" / square punches up to 60 mm; 2.36" / rectangular punches up to 85 mm; 3.35" diagonal
    Max. sheet metal thickness Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 4 mm; 6 ga
    Punching force 50 kN
    Powerman Vario
    2626-7206-01-00

    Powerman Vario

    Type PG1 with round punches from PG9 to PG21 in plastic case
    Suitable for round punches up to ø 80 mm; 3.15" / square punches up to 60 mm; 2.36" / rectangular punches up to 85 mm; 3.35" diagonal
    Max. sheet metal thickness Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 4 mm; 6 ga
    Punching force 50 kN
    Powerman Vario
    2626-7206-02-00

    Powerman Vario

    Type PG2 with round punches from PG9 to PG29 in plastic case
    Suitable for round punches up to ø 80 mm; 3.15" / square punches up to 60 mm; 2.36" / rectangular punches up to 85 mm; 3.35" diagonal
    Max. sheet metal thickness Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 4 mm; 6 ga
    Punching force 50 kN
    Powerman Vario
    2626-7207-01-01

    Powerman Vario

    Type with metric round punches from M12 to M50 in plastic case
    Suitable for round punches up to ø 80 mm; 3.15" / square punches up to 60 mm; 2.36" / rectangular punches up to 85 mm; 3.35" diagonal
    Max. sheet metal thickness Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 4 mm; 6 ga
    Punching force 50 kN
    Powerlec Vario
    2629-7200-00-00

    Powerlec Vario

    Type without round punches
    Suitable for round punches up to ø 80 mm, 3.15" / square punches up to 68 mm; 2.68" / rectangular punches up to 96 mm; 3.78" diagonal
    Max. sheet metal thickness Sheet steel to 2,5 mm; 12 ga / Stainless steel to 2 mm; 14 ga / Aluminum to 4 mm; 6 ga
    Punching force 60 kN
    Powerlec Vario
    2629-7200-01-01

    Powerlec Vario

    Type with metric round punch kit
    Suitable for round punches up to ø 80 mm, 3.15" / square punches up to 68 mm; 2.68" / rectangular punches up to 96 mm; 3.78" diagonal
    Max. sheet metal thickness Sheet steel to 2,5 mm; 12 ga / Stainless steel to 2 mm; 14 ga / Aluminum to 4 mm; 6 ga
    Punching force 60 kN
    Powerlec Vario Plus
    2629-7400-00-00

    Powerlec Vario Plus

    Suitable for round punches up to ø 120 mm; 4.72"
    Square punches 125 mm; 4.92"
    Rectangular punches up to 175 mm; 6.89" diagonal
    max. sheet metal thickness Sheet steel up to 2 mm; 14 ga
    Stainless steel up to 1,5 mm; 16 ga
    Punching force 63 kN
    Operating voltage 18V
    Powerlec Vario Plus
    2629-7401-00-00

    Powerlec Vario Plus

    Type Fan kit 92
    Suitable for round punches up to ø 120 mm; 4.72"
    Square punches 125 mm; 4.92"
    Rectangular punches up to 175 mm; 6.89" diagonal
    max. sheet metal thickness Sheet steel up to 2 mm; 14 ga
    Stainless steel up to 1,5 mm; 16 ga
    Punching force 63 kN
    Operating voltage 18V
    Powerlec Vario Plus
    2629-7402-00-00

    Powerlec Vario Plus

    Type Fan kit 125
    Suitable for round punches up to ø 120 mm; 4.72"
    Square punches 125 mm; 4.92"
    Rectangular punches up to 175 mm; 6.89" diagonal
    max. sheet metal thickness Sheet steel up to 2 mm; 14 ga
    Stainless steel up to 1,5 mm; 16 ga
    Punching force 63 kN
    Operating voltage 18V
    Powerman
    2684-7100-01-01

    Powerman

    Suitable for round punches up to ø 120 mm; 4.72" / square punches 92 mm; 3.62" / rectangular punches up to 138 mm; 5.43" diagonal
    Max. sheet metal thickness Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 4 mm; 6 ga
    Punching force 65 kN
    Powerman Step
    2685-7200-01-01

    Powerman Step

    Suitable for round punches up to ø 120 mm; 4.72" / square punches 92 mm; 3.62" / rectangular punches up to 138 mm; 5.43" diagonal
    Max. sheet metal thickness Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 4 mm; 6 ga
    Punching force 65 kN

    spare part for

    Powerman Vario
    2626-7206-01-00

    Powerman Vario

    Type PG1 with round punches from PG9 to PG21 in plastic case
    Suitable for round punches up to ø 80 mm; 3.15" / square punches up to 60 mm; 2.36" / rectangular punches up to 85 mm; 3.35" diagonal
    Max. sheet metal thickness Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 4 mm; 6 ga
    Punching force 50 kN
    Powerman Vario
    2626-7206-02-00

    Powerman Vario

    Type PG2 with round punches from PG9 to PG29 in plastic case
    Suitable for round punches up to ø 80 mm; 3.15" / square punches up to 60 mm; 2.36" / rectangular punches up to 85 mm; 3.35" diagonal
    Max. sheet metal thickness Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 4 mm; 6 ga
    Punching force 50 kN
    Printhäwa GmbH