Round Punch Threaded for Ø 19 mm (3/4”) Draw Studs
Key Features
- Long lifetime
- Maximum productivity with minimum effort
- For sheet steel or aluminum sheets
Product Description
For punching with "mobile devices".
Low tool wear through optimum cutting geometry.
Easy removal of the deformed waste piece.
Quick, precise and burr-free punching.
Technical Data
- Order No.: 2623-0882-00-00
- Max. sheet metal thickness: Steel 2 mm; 14 ga
Stainless steel 1,5 mm; 16 ga - Product range: for mobile devices
- Draw stud: Ø 19 mm / 3/4"
- Pilot hole Ø: 20 mm
- Diameter dimensions: 82 mm
Notice
- You need a häwa punching pump or a häwa hydraulic cylinder. If this hole tool is compatible with your häwa punching unit, please refer to the "Tool hint - Hole punch for mobile devices" under "Downloads".
- The max. sheet metal thickness to be punched is also dependent on the punching device.
Scope of Delivery
- 1 round punch, consisting of punch and die
Suitable for
Accessories
Accessories Punching Tools
Accessories for Punching Pumps
Mobile hydraulic cylinders
2611-7600-01-00
Hydraulic Cylinder Power 19
Product range | for mobile devices |
Suitable for | Round punches up to ø 135 mm; 5.31“ / square punches 103 mm; 4.06“ / rectangular punches up to a diagonal size of 145 mm; 5.71“ |
Max. sheet metal thickness | Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 4 mm; 6 ga |
Screw receptacle | 19 mm (3/4”) draw studs |
2611-7600-02-00
Hydraulic Cylinder Power 25
Product range | for mobile devices |
Suitable for | Round punches up to ø 185 mm; 7.28“ / square punches 140 mm; 5.51“ / rectangular punches up to a diagonal size of 195 mm; 7.68“ |
Max. sheet metal thickness | Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 4 mm; 6 ga |
Screw receptacle | Thread M25 x 1,5 |
2684-7600-01-00
Hydraulic Cylinder 19 (3/4”)
Product range | for mobile devices |
Suitable for | round punches up to ø 120 mm; 4.72" / square punches 92 mm; 3.62" / rectangular punches up to 138 mm; 5.43" diagonal |
Max. sheet metal thickness | Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 4 mm; 6 ga |
Screw receptacle | 19 mm (3/4”) draw studs |
Punching Tools
2629-7400-00-00
Powerlec Vario Plus
Suitable for | round punches up to ø 120 mm; 4.72" Square punches 125 mm; 4.92" Rectangular punches up to 175 mm; 6.89" diagonal |
max. sheet metal thickness | Sheet steel up to 2 mm; 14 ga Stainless steel up to 1,5 mm; 16 ga |
Punching force | 63 kN |
Operating voltage | 18V |
2629-7400-01-00
Powerlec Vario Plus
Suitable for | round punches up to ø 120 mm; 4.72" Square punches 125 mm; 4.92" Rectangular punches up to 175 mm; 6.89" diagonal |
max. sheet metal thickness | Sheet steel up to 2 mm; 14 ga Stainless steel up to 1,5 mm; 16 ga |
Punching force | 63 kN |
Operating voltage | 18V |
2629-7401-00-00
Powerlec Vario Plus
Type | Fan kit 92 |
Suitable for | round punches up to ø 120 mm; 4.72" Square punches 125 mm; 4.92" Rectangular punches up to 175 mm; 6.89" diagonal |
max. sheet metal thickness | Sheet steel up to 2 mm; 14 ga Stainless steel up to 1,5 mm; 16 ga |
Punching force | 63 kN |
Operating voltage | 18V |
2629-7402-00-00
Powerlec Vario Plus
Type | Fan kit 125 |
Suitable for | round punches up to ø 120 mm; 4.72" Square punches 125 mm; 4.92" Rectangular punches up to 175 mm; 6.89" diagonal |
max. sheet metal thickness | Sheet steel up to 2 mm; 14 ga Stainless steel up to 1,5 mm; 16 ga |
Punching force | 63 kN |
Operating voltage | 18V |
2684-7100-01-01
Powerman
Suitable for | round punches up to ø 120 mm; 4.72" / square punches 92 mm; 3.62" / rectangular punches up to 138 mm; 5.43" diagonal |
Max. sheet metal thickness | Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 4 mm; 6 ga |
Punching force | 65 kN |
2685-7200-01-01
Powerman Step
Suitable for | round punches up to ø 120 mm; 4.72" / square punches 92 mm; 3.62" / rectangular punches up to 138 mm; 5.43" diagonal |
Max. sheet metal thickness | Sheet steel 3 mm; 11 ga / Stainless steel 2 mm; 14 ga / Aluminum 4 mm; 6 ga |
Punching force | 65 kN |