Touch-Safe Small Heater Type CSK (Semi-Conductor) with PTC-Resistor
Key Features
- Small size
- Ensure a minimum operating temperature
- Prevent condensation
- Advantages of heaters with PTC-resistor: Dynamic heating up, temperature limiting, wide voltage range
Product Description
Cabinet heaters are used for heating up the air inside a control cabinet. Häwa offers a wide range of cabinet heaters from 10 to 1200 W to optimize the functionality of electric and electronic components, to ensure a minimum operating temperature and for frost monitoring in case of low ambient temperatures and high humidity.
The design of the heater supports the natural convection which results in a high air-flow of warm air
The surface temperatures on the accessible side surfaces of the housing are kept down as a result of the heater design
Heating element: Resistor (PTC) temperature limiting
The heaters are designed for permanent operation
Quick mounting: snap-on attachment to 35 mm DIN rail
Technical Data
- Order No.: 3185-0010-02-24
- Protection type: IP20
- Protection class: II (double insulation)
-
Operating-/storage temperature: from : -45 °C to : +70 °C
- Operating/storage humidity: max. 90% relative humidity (non-condensing)
- Surface temperature: at 20°C (68° F) ambient temperature (except upper grid): <+85° C (185° F)
- Heater output: 10 W
- Mounting: clip for snap-on attachment
- Power supply: 3-pin 2.5 mm2 terminal, max. tightening torque 0.8 Nm
- Heating element: PTC-resistor temperature limiting
- Start-up current: 6 A
- Fuse: 6.3 A (slow-blow)
- Approval: CE
- Weight: 0.2 kg
-
Dimensions (WxHxD): 38 mm 98 mm Depth : 75 mm
- Surface: housing: black plastic, UL94 V-0
- Nominal voltage: 24 V DC
- Fitting position: Vertical air flow direction (air outlet at top/connection at bottom)
- Type: CSK10
Notice
- When operating PTC-heaters below AC/DC 140 V the heater output will be reduced by approx. 10%.
- The specified heater output refers to an ambient temperature of 20° C (68° F).
- A safety clearance of 50 to 100 mm to the adjacent components shall be observed (according to the corresponding operation manual).
Scope of Delivery
- 1 heater
Accessories
Temperature Controller
Fix-Thermostat FTO
Temperature range | Switch-off temperature: +15 °C, Starting temperature: +5 °C |
Fix-Thermostat FTO
Temperature range | Switch-off temperature: +25 °C, Starting temperature: +15 °C |
Small Compact Thermostat with Thumbwheel Setting Dial
Control system | Opened con. (heating) |