Enter your search term here
  • full text search
    English
  • Export pages
  • Order No.: 3120-1600-23U37

    Non-Filter Air Conditioners with Premium Control Electronics

    Key Features

    • Compact design
    • Low maintenance
    • High cooling capacity
    • Protection class: IP54
    • Resistant
    • Material: Sheet steel

    Product Description

    häwa air conditioners can be us as independent devices up to an ambient temperature of max. 50/55 °C. They have two separate IP54-sealed air circuits, equipped with 1 fan each.

    Heat transfer from the inside of the cabinet to the outside takes place through active cooling (refrigerating unit).

    This allows to cool down the temperature in the cabinet below the ambient temperature. häwa air conditioners operate with the CFC-free, ozone-friendly refrigerant R134a.

    For external or internal installation

    External fan operates only when cooling, which avoids unnecessary noise and pollution.

    The temperature is set at the factory to +35 °C. It can be field-adjusted after removal of the cover panel, or for devices equipped with a display, from the outside.

    A control line for the door switch, separately connected for units with a cooling capacity of 800 W or more, permits remote ON/OFF switching of the unit without power disconnect. General fault signal as potential-free changeover contact fed out in the control line.

    Free from silicone compounds, PCB, PCT, formaldehyde and cadmium.

    Standard controller KR-HS: Circuit board with one temperature gauge integrated in the device.

    Display controller KR-HD: Circuit board with 4 temperature gauges integrated in the device and control unit KR-B built into the front panel of the device.

    Any condensed water is evaporated in the external circuit. In case of excessive condensation e.g. due to open doors or an extremely high air humidity, excess condensation is drained off via a fitting through the slots in the bottom of the housing cover (for KF800 to KF2400), or it can be led directly to the outside by connecting a hose on the drain fitting.

    For KF800 to KF2400, power connection is effected via a plug-in terminal at the rear side of the device. The mating connector is included in the scope of delivery. For KF400, the power cord is fed through the rear of the device.

    Technical Data

    • Order No.: 3120-1600-23U37
    • Nominal voltage: 230 V AC
    • Frequency: FREQUENZ1 : 50 Hz  / 60 Hz 
    • Protection type: IP54, external fan IP44 
    • Lower/upper operating limit: 20 °C / 40 °C
    • Refrigerant: R134a
    • Useful cooling capacity: 1600 W
    • Unimpeded air flow cold/warm: 860/1200 m³/h
    • Material: Sheet steel
    • Factory-set: + 35 °C
    • Mounting type: external/internal installation
    • Power supply: plug-in terminal
    • Power consumption at 50Hz: 958 W
    • Nominal current at 50Hz: 4,7 A
    • Nominal current at 60Hz: 6,5 A
    • Start-up current: 30 A max.
    • Fuse: 16 AT
    • Approvals: CE; cURus
    • Weight: 51 kg
    • Dimensions (WxHxD): widht : 400 mm  height : 1450 mm  depth : 162 mm 
    • Surface finish: Powder coating RAL 7035, texture finish
    • TYP: KF1600U

    Notice

    • Power consumption and useful cooling capacity specifications relate to L35-L35 according to DIN 3168

    Scope of Delivery

    • Air conditioner
    • Rubber seals
    • Mounting hardware
    Printhäwa GmbH