Free-Standing cabinets Sheet steel H390, single door
Key Features
- Sheet steel
- Free-standing cabinet
- Depth 400 mm
- Protection class IP/Nema/Type: see Technical data
- System accessories permit modular extension
Product Description
Free-standing cabinets with single or double door design. Available with or without mounting plate. Mounting rails for 100 % utilization of häwa accessories available as option.
Protective grounding according to DIN EN 61439-1, M8x20 studs on all movable and detachable parts as well as on top and bottom frame areas, mounting plate with ground connector screw and cable entry plates with drilling
Flanged edges prevent dust and water from entering when opening the door
Doors with seamlessly foamed gasket can be mounted either at left or right side, standard delivery includes doors hinged on right side
Opening angle 120° can be modified to 180°
Locking: Bar lock
Standard with 3 mm double mandrel bolt
Bolted reinforcement and attachment frame of solid square tubes perforated with 4.5 mm holes every 25 mm
Top plate can be removed, with 4 lifting eyes M12 to DIN 580
Bottom with three-part, adjustable cable entry plate and 10.6 mm mounting holes
C-flanged mounting plate, adjustable to depth every 25 mm; quick and easy mounting with häwa locking brackets
Technical Data
- Order No.: 0390-1020-40-07
- Protective ground connection: according to DIN EN 61439-1
- Protection type: IP55
- Degree of protection Type: 1, 12
- Material: Sheet steel
- Approval: cULus
-
Dimensions (WxHxD): width : 1000 mm height : 2000 mm depth : 400 mm
- Weight: 110.5 kg
- Cabinet type: Free standing cabinets
- Type: without mounting plate
- Surface finish: Powder coating RAL 7035, texture finish
- Sheet thickness: Door: 2 mm(ga)
Roof angle: 2 mm(ga)
Carrier angle ground group: 2,5 mm(ga)
Frame/Body: 1,5 mm(ga)
Rear wall: 1,5 mm(ga)
Notice
- Rear panel with hinged door or other modifications involve delivery time. Price upon request.
- Attention: Center attachment type 0391-0003-..-00 cannot be combined with vertical mounting rails type 0391-90..-00-03.
- Modular assembly is achieved by using the horizontal/vertical mounting rails.For width 1600/2000, 2 horizontal mounting rails are required.
- Please refer to base drawings for base mounting dimensions.
- By mounting the RainKit (see accessories), UL Type 3R is additionally achieved.
Scope of Delivery
- Cabinet complete with lifting eyes, top plate, bottom cable entry plate and 1 key
Accessories
Accessories Sheet steel
Side panel/Bases
0396-1001-40-17
Bases height 3.94" for H390, H395 abd PC2096
| Suitable for width | 1000 mm |
| Suitable for depth | 400 mm |
| Material | Sheet steel |
| Socket size | 350 mm |
0396-1001-41-17
100 mm high base for H390 cabinets only (flush with rear side)
| Suitable for width | 1000 mm |
| Suitable for depth | 400 mm |
| Material | Sheet steel |
| Socket size | 375 mm |
0396.1002.40.17
Bases height 7.87" for cabinets type H390 and H395
| Suitable for width | 1000 mm |
| Suitable for depth | 400 mm |
| Socket size | 350 mm |
0396.1002.41.17
Base height 7.87" only for cabinets type H390 (flush with rear side)
| Suitable for width | 1000 mm |
| Suitable for depth | 400 mm |
| Material | Sheet steel |
| Socket size | 375 mm |
Doors/Rear wall
0395-1020-00-97
Replacement door for sheet steel cabinets type H390/H395
| Suitable for cabinet width | 1000 mm |
| Suitable for cabinet height | 2000 mm |
| Material | Sheet steel |
| Version | Single door |
0395-1020-05-97
Replacement door for sheet steel cabinets type H390/H395
| Suitable for cabinet width | 1000 mm |
| Suitable for cabinet height | 2000 mm |
| Material | Sheet steel |
| Version | Double door set |
Universal Accessories / Accessories for Internal Mounting
Mounting plate
Mounting rail
19 "components
Grounding/EMC
3080-9036-16-20
Cable for protective ground connection
| Length L | 220 mm |
| Drilling diameter d | 8.5 mm |
| Cross-section | 16 mm² |
3080-9036-16-35
Cable for protective ground connection
| Length L | 370 mm |
| Drilling diameter d | 8.5 mm |
| Cross-section | 16 mm² |
Lighting
3080-7041-61-95
Door Switch for Cabinets H3X0/H3X5
| Contact | 1 Normally open, 1 normally closed |
| Housing and lid | Glass fiber reinforced plastic (UL 94-V0) |
| Utilization category | AC-15, Ue/le 240V/3A |
| Rated operating voltage | Ue 240V |
3080-0041-13-01
Door Contact Switch
| Design | Change-over (co = closed open) |
| Mounting | screw fixing M5 |
| Max. switching capacity | AC 250 V, 8 (1.5) A |
| Connection | 4-pole terminal, max. tightening torque 0.5 Nm |
3080-0041-13-02
Door Contact Switch
| Design | Opener (nc=normally closed) |
| Mounting | screw fixing M5 |
| Max. switching capacity | AC 250 V, 8 (1.5) A |
| Connection | 4-pole terminal, max. tightening torque 0.5 Nm |
3080-0041-13-03
Door Contact Switch
| Design | turnkey (no = normally open) |
| Mounting | screw fixing M5 |
| Max. switching capacity | AC 250 V, 8 (1.5) A |
| Connection | 4-pole terminal, max. tightening torque 0.5 Nm |
3080-7006-12-07
Mounting kit for lamps
| Ausführung | Sheet steel cover plate: Powder coating RAL 7035, texture finish |
| Width | 65 mm |
| Height | 1 mm |
| Length | 440 mm |
3080-7041-24-07
Sensor Operated LED lamp
| Operating voltage | 24V DC +/- 10% at 120Vpp ripple |
| Socket | without |
| Luminosity | 1200 Lm at 120° |
| Switch | reflex light barrier |
Transport/Modular assembly
Cable routing/-mounting/-storage
0396-7114-10-07
Combination work plate/diagram pocket
| Dimensions | Width (b): 748 mm/29,45" Suitable for width: 1000 mm/39,40" (single door) |
2070-9102-34-00
Clip-nuts
| Thread | M 4 |
| Suitable for sheet metal thickness | 0,7 - 1,6 mm/0,03 - 0,06" |
| for cut-out size | 9,5x9,5 mm/0,37x0,37" |
| Variante | Sheet steel, without grounding pin |
2070-9102-35-00
Clip-nuts
| Thread | M 5 |
| Suitable for sheet metal thickness | 0,7 - 1,6 mm/0,03 - 0,06" |
| for cut-out size | 9,5x9,5 mm/0,37x0,37" |
| Variante | Sheet steel, without grounding pin |
2070-9202-35-00
Clip-nuts
| Thread | M 5 |
| Suitable for sheet metal thickness | 0,7 - 1,6 mm/0,03 - 0,06" |
| for cut-out size | 9,5x9,5 mm/0,37x0,37" |
| Variante | Stainless steel, without grounding pin |
2070-9102-45-01
Clip-nuts
| Thread | M 5 |
| Suitable for sheet metal thickness | 1,5 - 2,0 mm |
| for cut-out size | 9,5x9,5 mm/0,37x0,37" |
| Variante | Sheet steel, with grounding pin |
2070-9102-35-02
Clip-nuts
| Thread | M 5 |
| Suitable for sheet metal thickness | 1,7 - 2,7 mm |
| for cut-out size | 9,5x9,5 mm/0,37x0,37" |
| Variante | Sheet steel, without grounding pin |
2070-9202-35-02
Clip-nuts
| Thread | M 5 |
| Suitable for sheet metal thickness | 1,7 - 2,7 mm |
| for cut-out size | 9,5x9,5 mm/0,37x0,37" |
| Variante | Stainless steel, without grounding pin |
2070-9102-35-03
Clip-nuts
| Thread | M 5 |
| Suitable for sheet metal thickness | 2,8 - 3,5 mm |
| for cut-out size | 9,5x9,5 mm/0,37x0,37" |
| Variante | Sheet steel, without grounding pin |
2070-9202-35-03
Clip-nuts
| Thread | M 5 |
| Suitable for sheet metal thickness | 2,8 - 3,5 mm |
| for cut-out size | 9,5x9,5 mm/0,37x0,37" |
| Variante | Stainless steel, without grounding pin |
2070-9102-36-00
Clip-nuts
| Thread | M 6 |
| Suitable for sheet metal thickness | 0,7 - 1,6 mm/0,03 - 0,06" |
| for cut-out size | 9,5x9,5 mm/0,37x0,37" |
| Variante | Sheet steel, without grounding pin |
2070-9202-36-00
Clip-nuts
| Thread | M 6 |
| Suitable for sheet metal thickness | 0,7 - 1,6 mm/0,03 - 0,06" |
| for cut-out size | 9,5x9,5 mm/0,37x0,37" |
| Variante | Stainless steel, without grounding pin |
2070-9102-46-00
Clip-nuts
| Thread | M 6 |
| Suitable for sheet metal thickness | 0,9 - 1,9 mm |
| for cut-out size | 9,5x9,5 mm/0,37x0,37" |
| Variante | Sheet steel, with grounding pin |
2070-9102-46-01
Clip-nuts
| Thread | M 6 |
| Suitable for sheet metal thickness | 1,5 - 2,0 mm |
| for cut-out size | 9,5x9,5 mm/0,37x0,37" |
| Variante | Sheet steel, with grounding pin |
2070-9102-46-02
Clip-nuts
| Thread | M 6 |
| Suitable for sheet metal thickness | 1,8 - 2,9 mm |
| for cut-out size | 9,5x9,5 mm/0,37x0,37" |
| Variante | Sheet steel, with grounding pin |
2070-9102-36-02
Clip-nuts
| Thread | M 6 |
| Suitable for sheet metal thickness | 1,7 - 2,7 mm |
| for cut-out size | 9,5x9,5 mm/0,37x0,37" |
| Variante | Sheet steel, without grounding pin |
2070-9202-36-02
Clip-nuts
| Thread | M 6 |
| Suitable for sheet metal thickness | 1,7 - 2,7 mm |
| for cut-out size | 9,5x9,5 mm/0,37x0,37" |
| Variante | Stainless steel, without grounding pin |
2070-9203-36-03
Clip-nuts
| Thread | M 6 |
| Suitable for sheet metal thickness | 1,8 - 3,2 mm |
| for cut-out size | 12,3x12,3 mm/0,48x0,48" |
| Variante | Stainless steel, without grounding pin |
2070-9102-36-03
Clip-nuts
| Thread | M 6 |
| Suitable for sheet metal thickness | 2,8 - 3,5 mm |
| for cut-out size | 9,5x9,5 mm/0,37x0,37" |
| Variante | Sheet steel, without grounding pin |
2070-9202-36-03
Clip-nuts
| Thread | M 6 |
| Suitable for sheet metal thickness | 2,8 - 3,5 mm |
| for cut-out size | 9,5x9,5 mm/0,37x0,37" |
| Variante | Stainless steel, without grounding pin |
2070-9102-46-03
Clip-nuts
| Thread | M 6 |
| Suitable for sheet metal thickness | 2,8 - 3,5 mm |
| for cut-out size | 9,5x9,5 mm/0,37x0,37" |
| Variante | Sheet steel, with grounding pin |
Hold up
3080-7109-87-00
Door opening limiter for H390/H395, H370/H375
| Surface | Galvanized |
| Material | Sheet steel |
| suitable for type | H390/H395 and H370/H375 from door width 500 mm |
