Pivoting lever closure square installation opening
Key Features
- For flat bars
- Squared installation opening
- Through degree of protection IP65, also suitable for installation in 2-leaf cabinets
Product Description
Applicable as right hand and left hand lock.
The lockable actuation handle is sunk in locked state. For unlocking it has to be turned upwards.
With sealable cylinder lock cover.
Concerning pivoting lever closure for flat bars applies: suitabe for frame connector closing, as well as for closures within a sealing surface.; concerning frame connector closing: width of frame connector at least 40 mm and degree of protection IP40.; for the mounting of the flat bars a bar lock is required.; can mount suitable standard latches through „adaptor for latch“. Concerning this, please take into account the reference for „adaptor for latches“.
IP65 (through correctly mounted sealings) applies within a sealing surface.
IP40 for closures outside a sealing surface or in case of low reqirements for the degree of protection.
Technical Data
- Order No.: 3070-0907-92-01
- Version: for flat bar
- häwa Logo: yes
- Material and Surface: handle, recess and sliding cover: Polyamide black, fixing parts: galvanized steel
-
SCHLIESSUNG: lockable with profile half cylinder (L= mx. 40 mm) or unlockable with blind plugs
- Protection type: IP65
Notice
- Cylinder lock, latch, guides and push rods have to be ordered separately.
- Caution: guides, adaptors and push rods have to be ordered 2x, „latch diecasting“ for flat bars are appropriate for overlapping doors. Suitable for e. g. cabinets of häwa.
Scope of Delivery
- 1 Pivoting lever closure with fixing parts and in case of IP65-version with sealings.
Accessories
Accessories locking systems
Hook latch for quarter turn latch locks
| Material | Sheet steel |
| Surface | Galvanized |
| type | Small version |
Hook latch for quarter turn latch locks
| Material | Sheet steel |
| Surface | Galvanized |
| type | Big version |
Latch without stop lug
| Material | Sheet steel |
| Surface | Galvanized |
| type | with push rod connection |
Latch without stop lug
| Material | Sheet steel |
| Surface | Galvanized |
| type | with push rod connection |
Latch without stop lug
| Material | Sheet steel |
| Surface | Galvanized |
| type | with push rod connection |
Profile half cylinder actuation by push-button
| Material | zinc die-casting |
| Surface | chromed |
Flat bar with castors
| Material | Sheet steel |
| Surface | Galvanized |
| Dimension | 1000 mm |
Flat bar with castors
| Material | Sheet steel |
| Surface | Galvanized |
| Dimension | 1200 mm |
