Pivoting lever closure square installation opening Softline
Key Features
- For round rods or flat bars
- Square installation opening
- Through degree of protection IP65 also suitable for installations in 2-leaf cabinets with degree of protection
Product Description
Applicable as right hand or left hand lock
The lockable actuation handle is sunk in closed state. For unlocking it has to be turned upwards.
Concerning turning lever closures for round rods applies: can only be used within a sealing surface (large space requirements); latches for closing heights from 6 mm (b-measure) can be installed („adaptor for turning levers“ are not required)
Concerning turning lever closures for flat bars applies: suitable for frame connector closing as well as for closures within a sealing surface.; concerning frame connector closing: width of frame connector at least 40 mm and degree of protection IP40.; for the mounting of the flat bar a bar lock is required.; can mount suitable standard latches through „adaptor for latch“. Concerning this, please take into account the reference for „adaptor for latches“.
IP65 (through correctly mounted sealings) applies within a sealing surface.
IP40 for closures outside a sealing surface or in case of low reqirements for the degree of protection.
Technical Data
- Order No.: 3070-0904-55-00
- Version: For flat bars, pos. 2
- häwa Logo: no
- Material and Surface: handle, recess and sliding cover: Polyamide black, fixing parts: galvanized steel
-
SCHLIESSUNG: lockable with profile half cylinder (L=max. 40 mm and cylinder head protruding up to 5 mm) or unlockable with blind plugs
- Shut height: depending on latch used
- Protection type: IP40
Notice
- Cylinder lock, latch, guides and push rods have to be ordered separately. Caution: guides, adaptors and push rods have to be ordered 2x, „latch diecasting“ for flat bars are appropriate for overlapping doors. Suitable for e. g. cabinets of häwa
Scope of Delivery
- 1 Pivoting lever closure with fixing parts and concerning IP65-version with sealings
Accessories
Accessories locking systems
Latch without stop lug
| Material | Sheet steel |
| Surface | Galvanized |
| type | with push rod connection |
Latch without stop lug
| Material | Sheet steel |
| Surface | Galvanized |
| type | with push rod connection |
Latch without stop lug
| Material | Sheet steel |
| Surface | Galvanized |
| type | with push rod connection |
Profile half cylinder actuation by push-button
| Material | zinc die-casting |
| Surface | chromed |
Flat bar with castors
| Material | Sheet steel |
| Surface | Galvanized |
| Dimension | 1000 mm |
Flat bar with castors
| Material | Sheet steel |
| Surface | Galvanized |
| Dimension | 1200 mm |
