Enter your search term here
  • full text search
    English
  • Export pages
  • Order No.: 3070-0904-50-01

    Pivoting lever closure square installation opening Softline

    Key Features

    • For round rods or flat bars
    • Square installation opening
    • Through degree of protection IP65 also suitable for installations in 2-leaf cabinets with degree of protection

    Product Description

    Applicable as right hand or left hand lock

    The lockable actuation handle is sunk in closed state. For unlocking it has to be turned upwards.

    Concerning turning lever closures for round rods applies: can only be used within a sealing surface (large space requirements); latches for closing heights from 6 mm (b-measure) can be installed („adaptor for turning levers“ are not required)

    Concerning turning lever closures for flat bars applies: suitable for frame connector closing as well as for closures within a sealing surface.; concerning frame connector closing: width of frame connector at least 40 mm and degree of protection IP40.; for the mounting of the flat bar a bar lock is required.; can mount suitable standard latches through „adaptor for latch“. Concerning this, please take into account the reference for „adaptor for latches“.

    IP65 (through correctly mounted sealings) applies within a sealing surface.

    IP40 for closures outside a sealing surface or in case of low reqirements for the degree of protection.

    Technical Data

    • Order No.: 3070-0904-50-01
    • Version: For flat bars, pos. 1
    • häwa Logo: yes
    • Material and Surface: handle, recess and sliding cover: Polyamide black, fixing parts: galvanized steel
    • SCHLIESSUNG: lockable with profile half cylinder (L=max. 40 mm and cylinder head protruding up to 5 mm) or unlockable with blind plugs 
    • Shut height: depending on latch used
    • Protection type: IP65

    Notice

    • Cylinder lock, latch, guides and push rods have to be ordered separately. Caution: guides, adaptors and push rods have to be ordered 2x, „latch diecasting“ for flat bars are appropriate for overlapping doors. Suitable for e. g. cabinets of häwa

    Scope of Delivery

    • 1 Pivoting lever closure with fixing parts and concerning IP65-version with sealings

    Accessories

    Accessories locking systems

    Latch type D
    3070-0304-18-25

    Latch type D

    b-Dimension 18 mm
    Length of latch 25 mm
    Latch type D
    3070-0304-18-35

    Latch type D

    b-Dimension 18 mm
    Length of latch 35 mm
    Latch type D
    3070-0304-15-00

    Latch type D

    b-Dimension 18 mm
    Length of latch 45 mm
    Latch type D
    3070-0704-18-05

    Latch type D

    b-Dimension 18 mm
    Length of latch 45 mm
    Latch type D
    3070-0304-20-35

    Latch type D

    b-Dimension 20 mm
    Length of latch 35 mm
    Latch type D
    3070-0304-18-00

    Latch type D

    b-Dimension 20 mm
    Length of latch 45 mm
    Latch type D
    3070-0304-22-35

    Latch type D

    b-Dimension 22 mm
    Length of latch 35 mm
    Latch type D
    3070-0304-20-00

    Latch type D

    b-Dimension 22 mm
    Length of latch 45 mm
    Latch type D
    3070-0704-22-05

    Latch type D

    b-Dimension 22 mm
    Length of latch 45 mm
    Latch type D
    3070-0304-24-35

    Latch type D

    b-Dimension 24 mm
    Length of latch 35 mm
    Latch type D
    3070-0304-28-35

    Latch type D

    b-Dimension 28 mm
    Length of latch 35 mm
    Latch type D
    3070-0304-29-00

    Latch type D

    b-Dimension 28 mm
    Length of latch 45 mm
    Latch type D
    3070-0304-32-00

    Latch type D

    b-Dimension 32 mm
    Length of latch 45 mm
    Latch type D
    3070-0304-35-35

    Latch type D

    b-Dimension 35 mm
    Length of latch 35 mm
    Latch type D
    3070-0304-35-00

    Latch type D

    b-Dimension 35 mm
    Length of latch 45 mm
    Latch type D
    3070-0304-40-00

    Latch type D

    b-Dimension 40 mm
    Length of latch 45 mm
    Latch type D
    3070-0304-50-00

    Latch type D

    b-Dimension 50 mm
    Length of latch 45 mm
    Latch for push rod connection
    3070-0314-18-00

    Latch for push rod connection

    b-Dimension 18 mm
    Latch for push rod connection
    3070-0315-15-00

    Latch for push rod connection

    b-Dimension 20 mm
    Latch for push rod connection
    3070-0714-20-05

    Latch for push rod connection

    b-Dimension 20 mm
    Latch for push rod connection
    3070-0314-20-00

    Latch for push rod connection

    b-Dimension 22 mm
    Latch for push rod connection
    3070-0714-22-05

    Latch for push rod connection

    b-Dimension 22 mm
    Latch for push rod connection
    3070-0314-28-00

    Latch for push rod connection

    b-Dimension 28 mm
    Latch for push rod connection
    3070-0714-28-05

    Latch for push rod connection

    b-Dimension 28 mm
    Latch for push rod connection
    3070-0314-35-00

    Latch for push rod connection

    b-Dimension 35 mm
    Latch for push rod connection
    3070-0314-40-00

    Latch for push rod connection

    b-Dimension 40 mm
    Latch for push rod connection
    3070-0314-50-00

    Latch for push rod connection

    b-Dimension 50 mm
    Push rod power unit without latch
    3070-0314-00-00

    Push rod power unit without latch

    Material Sheet steel
    Surface Galvanized
    Latch without stop lug
    3070-0911-00-15

    Latch without stop lug

    Material Sheet steel
    Surface Galvanized
    type simple
    Latch without stop lug
    3070-0911-00-20

    Latch without stop lug

    Material Sheet steel
    Surface Galvanized
    type simple
    Latch without stop lug
    3070-0911-07-15

    Latch without stop lug

    Material Sheet steel
    Surface Galvanized
    type with push rod connection
    Latch without stop lug
    3070-0911-07-18

    Latch without stop lug

    Material Sheet steel
    Surface Galvanized
    type with push rod connection
    Latch without stop lug
    3070-0911-07-20

    Latch without stop lug

    Material Sheet steel
    Surface Galvanized
    type with push rod connection
    Latch die casting
    8101-208-9401

    Latch die casting

    Material zinc die-casting
    Surface raw
    Profile half cylinder type 2
    3070-0900-12-00

    Profile half cylinder type 2

    Lock: Square 7 mm
    Profile half cylinder type 2
    3070-0900-13-00

    Profile half cylinder type 2

    Lock: Square 8 mm
    Profile half cylinder type 2
    3070-0900-14-00

    Profile half cylinder type 2

    Lock: 3 mm double-bit actuation
    Profile half cylinder type 2
    3070-0900-18-00

    Profile half cylinder type 2

    Lock: Double bit 5 mm
    Profile half cylinder type 2
    3070-0900-16-00

    Profile half cylinder type 2

    Lock: Daimler-Benz
    Profile half cylinder actuation by push-button
    3070-0902-05-00

    Profile half cylinder actuation by push-button

    Material zinc die-casting
    Surface chromed
    Adapter ring
    3070-0901-27-01

    Adapter ring

    Material Polyamide
    Surface black
    Bar lock short
    8101-208-9001

    Bar lock short

    Material zinc die-casting
    Surface raw
    Bar lock long
    8101-208-9003

    Bar lock long

    Material zinc die-casting
    Surface raw
    type For hooking in
    Bar lock long
    8101-208-9002

    Bar lock long

    Material zinc die-casting
    Surface raw
    type For clipping on
    Adapter for latch
    8101-208-9403

    Adapter for latch

    Material zinc die-casting
    Surface raw
    Adapter for latch
    8101-208-9406

    Adapter for latch

    Material Stainless steel 1.4401
    Surface Unfinished
    Double hook
    8101-208-1404.7-7062

    Double hook

    Material zinc die-casting
    Surface Galvanized
    Flat bar with castors
    8101-208-9701.0-394

    Flat bar with castors

    Material Sheet steel
    Surface Galvanized
    Dimension 394 mm
    Flat bar with castors
    8101-208-9701.0-594

    Flat bar with castors

    Material Sheet steel
    Surface Galvanized
    Dimension 594 mm
    Flat bar with castors
    8101-208-9701.0-694

    Flat bar with castors

    Material Sheet steel
    Surface Galvanized
    Dimension 694 mm
    Flat bar with castors
    8101-208-9701.0-794

    Flat bar with castors

    Material Sheet steel
    Surface Galvanized
    Dimension 794 mm
    Flat bar with castors
    8101-208-9701.0-894

    Flat bar with castors

    Material Sheet steel
    Surface Galvanized
    Dimension 894 mm
    Flat bar with castors
    8101-208-9701.0-1000

    Flat bar with castors

    Material Sheet steel
    Surface Galvanized
    Dimension 1000 mm
    Flat bar with castors
    8101-208-9701.0-1200

    Flat bar with castors

    Material Sheet steel
    Surface Galvanized
    Dimension 1200 mm
    Flat bars bottom
    8101-208-9824.00-748

    Flat bars bottom

    Material Sheet steel
    Surface Galvanized
    Dimension 748 mm
    Flat bars bottom
    8101-208-9824.04-748

    Flat bars bottom

    Material Stainless steel
    Surface Unfinished
    Dimension 748 mm
    Flat bars bottom
    8101-208-9824.00-848

    Flat bars bottom

    Material Sheet steel
    Surface Galvanized
    Dimension 848 mm
    Flat bars bottom
    8101-208-9825.00-848

    Flat bars bottom

    Material Stainless steel
    Surface Unfinished
    Dimension 848 mm
    Flat bars bottom
    8101-208-9824.00-948

    Flat bars bottom

    Material Sheet steel
    Surface Galvanized
    Dimension 948 mm
    Flat bars bottom
    8101-208-9825.00-948

    Flat bars bottom

    Material Stainless steel
    Surface Unfinished
    Dimension 948 mm
    Flat bars bottom
    8101-208-9824.0-1048

    Flat bars bottom

    Material Sheet steel
    Surface Galvanized
    Dimension 1048 mm
    Flat bars top
    8101-208-9826.00-646

    Flat bars top

    Material Sheet steel
    Surface Galvanized
    Dimension 646 mm
    Flat bars top
    8101-208-9826.04-646

    Flat bars top

    Material Stainless steel
    Surface Unfinished
    Dimension 646 mm
    Flat bars top
    8101-208-9826.00-746

    Flat bars top

    Material Sheet steel
    Surface Galvanized
    Dimension 746 mm
    Flat bars top
    8101-208-9827.00-746

    Flat bars top

    Material Stainless steel
    Surface Unfinished
    Dimension 746 mm
    Flat bars top
    8101-208-9826.00-846

    Flat bars top

    Material Sheet steel
    Surface Galvanized
    Dimension 846 mm
    Flat bars top
    8101-208-9827.00-846

    Flat bars top

    Material Stainless steel
    Surface Unfinished
    Dimension 846 mm
    Flat bars top
    8101-208-9826.00-946

    Flat bars top

    Material Sheet steel
    Surface Galvanized
    Dimension 946 mm
    Printhäwa GmbH