Sealing set for quarter turn latch lock
Key Features
Product Description
Sealing set for achieving the degree of protection IP65 concerning quarter turn latch locks.
Flat sealing with internal square drive in order to seal up between quarter turn latch lock housing and door/flap. If you do not have a quarter turn latch lock housing with 4 surfaces, you can compose them on your own or just ask one of our consultants.
The O-shaped ring is intended for sealing up the actuation in the quarter turn latch lock housing
Technical Data
- Order No.: 3070-7502-65-00
Notice
- For IP67 an additional O-shaped ring 8101-200-1002 is required.
- The sealings from this sealing set are also available as single parts.
- Sealing ring for quarter turn latch lock inset 3070-0565-12-00 and sealing disk quarter turn latch lock housing 8101-200-0901.
Scope of Delivery
- 1 flat sealing + 1 O-shaped ring
Accessories
Accessories locking systems
Suitable for
Accessories
Accessories locking systems
3070-0705-12-05
Quarter turn latch lock inset
| Material | Stainless steel 1.4401 |
| Surface | Unfinished |
| type | Square 7 mm |
3070-0705-13-05
Quarter turn latch lock inset
| Material | Stainless steel 1.4401 |
| Surface | Unfinished |
| type | Square 8 mm |
3070-0705-14-05
Quarter turn latch lock inset
| Material | Stainless steel 1.4401 |
| Surface | Unfinished |
| type | Double bit 3 mm |
3070-0705-15-05
Quarter turn latch lock inset
| Material | Stainless steel 1.4401 |
| Surface | Unfinished |
| type | Triangular 8 mm |
3070-0705-16-05
Quarter turn latch lock inset
| Material | Stainless steel |
| Surface | Unfinished |
| type | Daimler-Benz |
3070-0705-17-05
Quarter turn latch lock inset
| Material | Stainless steel 1.4401 |
| Surface | Unfinished |
| type | Triangular 7 mm |
3070-0705-18-05
Quarter turn latch lock inset
| Material | Stainless steel 1.4401 |
| Surface | Unfinished |
| type | Double bit 5 mm |
3070-0705-19-05
Quarter turn latch lock inset
| Material | Stainless steel 1.4401 |
| Surface | Unfinished |
| type | Slot 2 mm |
3070-0705-73-05
Quarter turn latch lock inset
| Material | Stainless steel |
| Surface | Unfinished |
| type | T handle |
3070-0705-84-05
Quarter turn latch lock inset
| Material | Stainless steel |
| Surface | Unfinished |
| type | Star grip |
8101-203-0902
Nut for quarter turn latch lock
| Material | Sheet steel |
| Surface | Galvanized |
| type | As grounding nut |
8101-203-0902.4-00001
Nut for quarter turn latch lock
| Material | Stainless steel |
| Surface | untreated |
| type | As grounding nut |
