Reducer
Reducer
To reduce or increase from one cable duct size to the next one.
The snap-on cable duct covers require minimum space to open.
If necessary, they can be secured with screws after installation.
The chamfered cable duct ends permit a continuous open insertion.
This accessory is provided with pre-drilled holes for the attachment screws of the supplied connection brackets.

Remember
Cable duct system type 1204
from 60 x 60 to 30 x 30
115 mm
Sheet steel
Cable duct system type 1204
from 100 x 100 to 60 x 60
150 mm
Sheet steel
Cable duct system type 1204
from 150 x 150 mm to 100 x 100 mm
185 mm
Sheet steel
Cable duct system type 1204
from 300 x 150 mm to 150 x 150 mm
280 mm
Sheet steel
Cable duct system type 1207
from 60 x 60 to 30 x 30
115 mm
Stainless steel no. 1.4301
Cable duct system type 1207
from 100 x 100 to 60 x 60
150 mm
Stainless steel no. 1.4301
Cable duct system type 1207
from 150 x 150 mm to 100 x 100 mm
185 mm
Stainless steel no. 1.4301
Cable duct system type 1207
from 300 x 150 mm to 150 x 150 mm
280 mm
Stainless steel no. 1.4301

Telescopic Section
Telescopic Section
For length compensations of 75 mm / 2.95” up to 450 mm / 17.71“.
The snap-on cable duct covers require minimum space to open.
If necessary, they can be secured with screws after installation.
The chamfered cable duct ends permit a continuous open insertion.
The cable duct ends are provided with pre-drilled holes for the attachment screws of U-brackets or connection brackets.

Remember
Cable duct system type 1204
60 x 60 mm/2,36 x 2,36"
Length: 75 mm - 450 mm
Sheet steel
Cable duct system type 1204
100 x 100 mm/3,94 x 3,94"
Length: 75 mm - 450 mm
Sheet steel
Cable duct system type 1204
150 x 150 mm/5,91 x 5,91"
Length: 75 mm - 450 mm
Sheet steel
Cable duct system type 1204
11,81 x 5,91 inch
Length: 75 mm - 450 mm
Sheet steel
Cable duct system type 1207
60 x 60 mm/2,36 x 2,36"
Stainless steel no. 1.4301
Cable duct system type 1207
100 x 100 mm/3,94 x 3,94"
Stainless steel no. 1.4301
Cable duct system type 1207
150 x 150 mm/5,91 x 5,91"
Stainless steel no. 1.4301
Cable duct system type 1207
11,81 x 5,91 inch
Stainless steel no. 1.4301

End Cap
End Cap
For closure of duct ends.
This form part has pre-drilled holes for the connecting screws of the U-brackets and connection brackets.

Remember
Cable duct system type 1204
1,18 x 1,18 inch
42 mm
Sheet steel
Cable duct system type 1204
60 x 60 mm/2,36 x 2,36"
42 mm
Sheet steel
Cable duct system type 1204
100 x 100 mm/3,94 x 3,94"
42 mm
Sheet steel
Cable duct system type 1204
150 x 150 mm/5,91 x 5,91"
42 mm
Sheet steel
Cable duct system type 1204
11,81 x 5,91 inch
42 mm
Sheet steel
Cable duct system type 1207
1,18 x 1,18 inch
42 mm
Stainless steel no. 1.4301
Cable duct system type 1207
60 x 60 mm/2,36 x 2,36"
42 mm
Stainless steel no. 1.4301
Cable duct system type 1207
100 x 100 mm/3,94 x 3,94"
42 mm
Stainless steel no. 1.4301
Cable duct system type 1207
150 x 150 mm/5,91 x 5,91"
42 mm
Stainless steel no. 1.4301
Cable duct system type 1207
11,81 x 5,91 inch
42 mm
Stainless steel no. 1.4301

Adapter flange
Adapter flange
For mounting ducts to housings, cabinets, machinery etc.

Remember
Cable duct system type 1204
60 x 60 mm/2,36 x 2,36"
Sheet steel
Cable duct system type 1204
100 x 100 mm/3,94 x 3,94"
Sheet steel
Cable duct system type 1204
150 x 150 mm/5,91 x 5,91"
Sheet steel
Cable duct system type 1204
11,81 x 5,91 inch
Sheet steel
Cable duct system type 1204
1,18 x 1,18 inch
Sheet steel
Cable duct system type 1207
60 x 60 mm/2,36 x 2,36"
Stainless steel no. 1.4301
Cable duct system type 1207
100 x 100 mm/3,94 x 3,94"
Stainless steel no. 1.4301
Cable duct system type 1207
150 x 150 mm/5,91 x 5,91"
Stainless steel no. 1.4301
Cable duct system type 1207
11,81 x 5,91 inch
Stainless steel no. 1.4301
Cable duct system type 1207
1,18 x 1,18 inch
Stainless steel no. 1.4301

Reversing elbow
Reversing elbow
For changing the profile from horizontal to vertical cable routing.
The snap-on cable duct covers require minimum space to open.
If necessary, they can be secured with screws after installation.
The cable duct ends are provided with pre-drilled holes for the attachment screws of U-brackets or connection brackets.

Remember
Cable duct system type 1204
11,81 x 5,91 inch
90°
Outlet at right rear side
Sheet steel
Cable duct system type 1204
11,81 x 5,91 inch
90°
Outlet at left rear side
Sheet steel
Cable duct system type 1207
11,81 x 5,91 inch
90°
Outlet at right rear side
Stainless steel no. 1.4301
Cable duct system type 1207
11,81 x 5,91 inch
90°
Outlet at left rear side
Stainless steel no. 1.4301

Reversing T-Section
Reversing T-Section
Vertical outlet from horizontal cable routing direction.
This form part has drillings for the connecting screws of the U-connections or connection brackets.

Remember
Cable duct system type 1204
11,81 x 5,91 inch
Sheet steel
electrolytically-galvanised
Cable duct system type 1207
11,81 x 5,91 inch
Stainless steel no. 1.4301
Externally brushed

U-bracket
U-bracket
For assembly of cable ducts and accessories.

Remember
Cable duct system type 1204
60 x 60 mm/2,36 x 2,36"
horizontal
With pre-drilled holes
Cable duct system type 1204
60 x 60 mm/2,36 x 2,36"
horizontal
With threads
Cable duct system type 1204
100 x 100 mm/3,94 x 3,94"
horizontal
With pre-drilled holes
Cable duct system type 1204
100 x 100 mm/3,94 x 3,94"
horizontal
With threads
Cable duct system type 1204
100 x 100 mm/3,94 x 3,94"
horizontal
Long pre-drilled version
Cable duct system type 1204
100 x 100 mm/3,94 x 3,94"
horizontal
Long threaded version
Cable duct system type 1204
150 x 150 mm/5,91 x 5,91"
horizontal
With pre-drilled holes
Cable duct system type 1204
150 x 150 mm/5,91 x 5,91"
horizontal
With threads
Cable duct system type 1204
150 x 150 mm/5,91 x 5,91"
horizontal
Long pre-drilled version
Cable duct system type 1204
150 x 150 mm/5,91 x 5,91"
horizontal
Long threaded version
Cable duct system type 1204
11,81 x 5,91 inch
horizontal
With pre-drilled holes
Cable duct system type 1204
11,81 x 5,91 inch
horizontal
With threads
Cable duct system type 1204
11,81 x 5,91 inch
horizontal
Long pre-drilled version
Cable duct system type 1204
11,81 x 5,91 inch
horizontal
Long threaded version
Cable duct system type 1204
1,18 x 1,18 inch
horizontal
With pre-drilled holes
Cable duct system type 1204
1,18 x 1,18 inch
90°
horizontal left, right
With pre-drilled holes
Cable duct system type 1204
1,18 x 1,18 inch
45°
horizontal
With pre-drilled holes
Cable duct system type 1204
1,18 x 1,18 inch
90°
With pre-drilled holes
Cable duct system type 1204
1,18 x 1,18 inch
90°
With pre-drilled holes
Cable duct system type 1204
1,18 x 1,18 inch
90°
horizontal
With pre-drilled holes
Cable duct system type 1207
60 x 60 mm/2,36 x 2,36"
horizontal
With pre-drilled holes
Cable duct system type 1207
60 x 60 mm/2,36 x 2,36"
horizontal
With threads
Cable duct system type 1207
100 x 100 mm/3,94 x 3,94"
horizontal
With pre-drilled holes
Cable duct system type 1207
100 x 100 mm/3,94 x 3,94"
horizontal
With threads
Cable duct system type 1207
100 x 100 mm/3,94 x 3,94"
horizontal
Long pre-drilled version
Cable duct system type 1207
100 x 100 mm/3,94 x 3,94"
horizontal
Long threaded version
Cable duct system type 1207
150 x 150 mm/5,91 x 5,91"
horizontal
With pre-drilled holes
Cable duct system type 1207
150 x 150 mm/5,91 x 5,91"
horizontal
With threads
Cable duct system type 1207
150 x 150 mm/5,91 x 5,91"
horizontal
Long pre-drilled version
Cable duct system type 1207
150 x 150 mm/5,91 x 5,91"
horizontal
Long threaded version
Cable duct system type 1207
11,81 x 5,91 inch
horizontal
With pre-drilled holes
Cable duct system type 1207
11,81 x 5,91 inch
horizontal
With threads
Cable duct system type 1207
11,81 x 5,91 inch
horizontal
Long pre-drilled version
Cable duct system type 1207
11,81 x 5,91 inch
horizontal
Long threaded version
Cable duct system type 1207
1,18 x 1,18 inch
horizontal
With pre-drilled holes
Cable duct system type 1207
1,18 x 1,18 inch
90°
horizontal left, right
With pre-drilled holes
Cable duct system type 1207
1,18 x 1,18 inch
45°
horizontal
With pre-drilled holes
Cable duct system type 1207
1,18 x 1,18 inch
90°
With pre-drilled holes
Cable duct system type 1207
1,18 x 1,18 inch
90°
With pre-drilled holes
Cable duct system type 1207
1,18 x 1,18 inch
90°
horizontal
With pre-drilled holes

Connection Bracket
Connection Bracket
For assembly of cable ducts and accessories.

Remember
Cable duct system type 1204
60 x 60 mm/2,36 x 2,36"
With pre-drilled holes
Cable duct system type 1204
60 x 60 mm/2,36 x 2,36"
With threads
Cable duct system type 1204
60 x 60 mm/2,36 x 2,36"
45°
With pre-drilled holes
Cable duct system type 1204
60 x 60 mm/2,36 x 2,36"
45°
With threads
Cable duct system type 1204
60 x 60 mm/2,36 x 2,36"
90°
With pre-drilled holes
Cable duct system type 1204
60 x 60 mm/2,36 x 2,36"
90°
With threads
Cable duct system type 1204
60 x 60 mm/2,36 x 2,36"
22,5°
With pre-drilled holes
Cable duct system type 1204
60 x 60 mm/2,36 x 2,36"
22,5°
With threads
Cable duct system type 1204
100 x 100 mm/3,94 x 3,94"
With pre-drilled holes
Cable duct system type 1204
100 x 100 mm/3,94 x 3,94"
With threads
Cable duct system type 1204
100 x 100 mm/3,94 x 3,94"
45°
With pre-drilled holes
Cable duct system type 1204
100 x 100 mm/3,94 x 3,94"
45°
With threads
Cable duct system type 1204
100 x 100 mm/3,94 x 3,94"
90°
With pre-drilled holes
Cable duct system type 1204
100 x 100 mm/3,94 x 3,94"
90°
With threads
Cable duct system type 1204
100 x 100 mm/3,94 x 3,94"
22,5°
With pre-drilled holes
Cable duct system type 1204
100 x 100 mm/3,94 x 3,94"
22,5°
With threads
Cable duct system type 1204
150 x 150 mm/5,91 x 5,91"
With threads
Cable duct system type 1204
150 x 150 mm/5,91 x 5,91"
45°
With threads
Cable duct system type 1204
150 x 150 mm/5,91 x 5,91"
90°
With threads
Cable duct system type 1204
150 x 150 mm/5,91 x 5,91"
22,5°
With threads
Cable duct system type 1207
60 x 60 mm/2,36 x 2,36"
With pre-drilled holes
Cable duct system type 1207
60 x 60 mm/2,36 x 2,36"
With threads
Cable duct system type 1207
60 x 60 mm/2,36 x 2,36"
45°
With pre-drilled holes
Cable duct system type 1207
60 x 60 mm/2,36 x 2,36"
45°
With threads
Cable duct system type 1207
60 x 60 mm/2,36 x 2,36"
90°
With pre-drilled holes
Cable duct system type 1207
60 x 60 mm/2,36 x 2,36"
90°
With threads
Cable duct system type 1207
60 x 60 mm/2,36 x 2,36"
22,5°
With pre-drilled holes
Cable duct system type 1207
60 x 60 mm/2,36 x 2,36"
22,5°
With threads
Cable duct system type 1207
100 x 100 mm/3,94 x 3,94"
With pre-drilled holes
Cable duct system type 1207
100 x 100 mm/3,94 x 3,94"
With threads
Cable duct system type 1207
45°
With pre-drilled holes
Cable duct system type 1207
100 x 100 mm/3,94 x 3,94"
45°
With threads
Cable duct system type 1207
100 x 100 mm/3,94 x 3,94"
90°
With pre-drilled holes
Cable duct system type 1207
100 x 100 mm/3,94 x 3,94"
90°
With threads
Cable duct system type 1207
100 x 100 mm/3,94 x 3,94"
22,5°
With pre-drilled holes
Cable duct system type 1207
100 x 100 mm/3,94 x 3,94"
22,5°
With threads
Cable duct system type 1207
150 x 150 mm/5,91 x 5,91"
180°
With threads
Cable duct system type 1207
150 x 150 mm/5,91 x 5,91"
45°
With threads
Cable duct system type 1207
150 x 150 mm/5,91 x 5,91"
22,5°
With threads
Cable duct system type 1207
150 x 150 mm/5,91 x 5,91"
22,5°
With threads

Partition panel for straight duct sections
Partition panel for straight duct sections
With partition panels the ducts can be divided into chambers. Control lines may be separated from supply lines; or electric lines can be routed together with hydraulic or pneumatic cables in one duct.

Remember
Cable duct system type 1204
150 x 150 mm/5,91 x 5,91" + 300 x 150 mm/11,81 x 5,91"
498 mm
Sheet steel
Cable duct system type 1204
150 x 150 mm/5,91 x 5,91" + 300 x 150 mm/11,81 x 5,91"
998 mm
Sheet steel
Cable duct system type 1204
150 x 150 mm/5,91 x 5,91" + 300 x 150 mm/11,81 x 5,91"
1998 mm
Sheet steel
Cable duct system type 1207
150 x 150 mm/5,91 x 5,91" + 300 x 150 mm/11,81 x 5,91"
498 mm
Stainless steel no. 1.4301
Cable duct system type 1207
150 x 150 mm/5,91 x 5,91" + 300 x 150 mm/11,81 x 5,91"
998 mm
Stainless steel no. 1.4301
Cable duct system type 1207
150 x 150 mm/5,91 x 5,91" + 300 x 150 mm/11,81 x 5,91"
1998 mm
Stainless steel no. 1.4301

Contact for products
Find your personal point of contact
We are happy to help you.

The best switch cabinets and casings are not produced on an assembly line, but rather designed in close cooperation with our customers. Are you ready to begin? Then contact your personal häwa consultant.

Choose your advisor now

PM-Leitung: Herr Eglof. PM-Leitung: Herr Eglof.